INSTALLATION GUIDANCE
Please refer to the individual installation guide supplied for each product for more detailed and specific guidance
The Sensio range of LED illuminated mirrors and cabinets all feature one of three methods for installation.
1. BACK BOX MOUNTED MIRRORS
3. BRACKET MOUNTED CABINETS
Use the pre-drilled holes in the back box to measure and align where the mirror is to be installed. The back box is wall mounted, housing the components and battery compartments. The mirror simply slots onto the back box and is secured in place with screws, provided.
Cabinets are mains powered and supplied with the connecting cable exiting either at the top or bottom on the rear.
Mounting hooks
Mains connection exiting at the top
The cabinets are supplied with all the fixings required to hang.
Secure the included mounting brackets to the wall using the screws and rawl plugs. The cabinet is simply seated in place on the brackets via pre- installed hooks on the reverse of the unit.
Mains connection exiting at the bottom
Cabinets simply sit on the brackets making installation easy and unobtrusive
2. KEY-HOLE MOUNTED MIRRORS
Key-hole mounted mirrors simply hang on screws.
Secure screws into the wall using rawl plugs. Leave approximately 3mm protruding on which to seat the keyholes.
Some mirrors and cabinets within the Sensio range are provided with a connection cable pre-installed. This is indicated on each product page with this icon denoting the length of the pre-connected cable supplied.
1.5m
3mm
20
21
INSTALLATION GUIDANCE
Made with FlippingBook interactive PDF creator