GND Brochure 2023

CAT.GNDBROCHURE.4/23

Outstanding Chip Control and Stable Machining with Anti-Chatter Performance Grooving Toolholders GND Series Grooving / Cut-off Tools

GND 90° Inserts: Made to Order Items

Achieves high-precision machining with edge width tolerance of ±.0012 / .03 mm (seat size: 1.25 to 6 mm /front cutting edge angle 0°, 5°) 10 types of chipbreakers and 11 types of grades for various machining GNDXL Series Toolholders for deep grooves that can support groove depths up to 1.260” / 32mm (page 31) Introducing 90° inserts for special grooving (made to order) Internal coolant supply holders for small lathes are now available

Internal Coolant GND

GNDXL with 1 Corner Inserts

R eady to C reate N ew S tandards

Grooving Tool

Rigid Body The GND series features a monoblock structure and die steel bodies, which not only provides for stable processing but controls vibration. Not solely for grooving, the GND series features holders for groove-turn, proling, and face grooving.

Wide Variety of Chipbreakers

Full lineup of ten different chipbreakers for the GND covers a wide slate of machining operations, conditions and workpiece materials!

MG ML GG GL GF

CG CF

RG RN GA External Proling Proling / Necking Multifunctional

Grooving / Traverse machining General purpose Low feed

Grooving / Cut-off

Cut-Off

General purpose Low feed

Low cutting force General purpose Low cutting force General purpose General purpose For non-ferrous metals

■ Features and Benefits ● Wide application range: applicable for grooving, traverse cutting, profiling, necking, facing and internal boring ● Expanded Grade Lineup: featuring grades: AC8025P / AC8035P / AC5015S / AC5025S ● Stable tool life and a large chipbreaker offering prevents sudden breakages due to chip clogging. ● Achieving high efficiency machining with reduced chattering The mono-block structure and die steel body reduce vibration during machining around 30% compared to conventional tools ● Higher edge width precision even with unground inserts High-precision sintering technology achieves cutting edge width precision of ±0.03mm for seat sizes 1.25mm to 6.0mm (front cutting edge angle of 0° or 5°)

● Internal Coolant Supply Holders for Small Lathes Available ● Expanded lineup: 20×12mm Square Holders for Small Lathes

■ GNDXL Deep Grooving (page 31)

■ GND 90° Insert (Made to Order Item)

● GNDXL now available with a deep groove holder that can support groove depths up to 1.260” / 32 mm ● The integrated high-rigidity body and insert provide strong clamp-on specifications for excellent vibration resistance. ● Lineup of .750” / 1.000” / 20mm / 25mm square shank widths ● Applied 1-corner insert for deep grooving. Seat Size 3.0 to 6.0mm is in stock ( 2.0mm is made-to-order) ● Lineup of three chipbreakers: ML / GF / RN 1,600 1,200 800 400 0 -400 (N) (N) 1,600 1,200 800 400 0 -400 GNDXL Competitor F

Firmly clamped with grip effect

Seconds GNDXL GNDXL

GNDXL

Seconds

Competitor F

Part Material: 316 Stainless Steel Toolholder: GNDXLR2525M-332 Insert: GCMN3002-GF1-AC530U Cutting Conditions: vc= 330 SFM f= .0004 IPR ap= .3937” Wet (External lubrication) Competitor F

1,600 1,200

1,600 1,200 1,600 1,200

1,600 1,200

Page 37

90° Insert Quotation Sheet

● Ideal for grooving narrow parts and facing, O/D, and I/D applications that require unique approaches due to interference ● Unique design of the inserts prevent pullout for specific applications ● End shape of the insert is offered in different forms based on application needs: square, full radius, with a chamfer, etc. ● Available in 5mm (.197”) or less seat sizes (groove widths)

800 400 0

800 400 0 800 400 0 -400 -400

800 400 0

(N)

-400

0 1 2 3 4 5 6

Seconds

Part Material: 316 Stainless Steel Toolholder: GNDXLR2525M-332 Insert: GCMN3002-GF1-AC530U Cutting Conditions: vc= 330 SFM f= .0004 IPR ap= .3937” Wet (External lubrication) Part Material: 316 Stainless Steel Toolholder: GNDXLR2525M-332 Insert: GCMN3002-GF1-AC530U Cutting Conditions: vc= 330 SFM f= .0004 IPR ap= .3937” Wet (External lubrication) Part Material: 316 Stainless Steel Toolholder: GNDXLR2525M-332 Insert: GCMN3002-GF1-AC530U Cutting Conditions: vc= 330 SFM f= .0004 IPR ap= .3937” Wet (External lubrication)

GND Series - Cutting Performance ■ Grooving Toolholders GND - Cutting Performance Reduced chattering High-rigidity design reduces chattering by up to 30% as compared to conventional tools.

Both high rigidity and good chip evacuation performance

Internal Boring

Stable Vibration

Wide pocket improves chip evacuation performance

Die Steel Body

GND

Unstable Vibration

Packing of chips

GND

Oil Hole (2)

Improves chip evacuation

Competitor's Product B

GNDI

Large Vibration

Oil Hole (1)

· Die steel body · Mono-block structure

Coolant directed onto rake face of cutting edge

Mono-block Structure

GNDI GNDIS

Competitor's Product C

Competitor's Product A (Cassette Type)

Part Material: Structural Steel Holder: GNDLR2525M-220 Insert: GCMN2002-GG Cutting Conditions: v c = 330 SFM, f = .0039 IPR, a p = .79”, Wet

Part Material: Structural Steel Holder: GNDIR2532-T306 Insert: GCMN3002-GG Cutting Conditions: v c = 330 SFM, f = .0019 IPR, a p = .118”, Wet

Long, stable tool life ensures reliable functionality even on automatic production lines!

Substantially improved machining efficiency High-rigidity holder enables machining at high feed rates.

Reduction of chattering prevents unexpected breakage.

GND

f = .0117 IPR

Machining Efciency 300% or higher

Competitor's Product

f = .0031 IPR

Normal Wear

Breakage

Competitor's Product

Machining Efciency

GND

Part Material: Medium Carbon Steel Holder: GNDML2525M-618 Insert: GCMN6030-RG (AC530U) Cutting Conditions: vc=430 SFM, f =0.012 IPR, Wet

Part Material: Cr–Mo Alloy Steel Holder: GNDLR2525M-320 Insert: GCMN3002-GG (AC530U) Cutting Conditions: vc=430 SFM, f =0.012 IPR, Wet

■ Improved Chip Control

Grooving

Traverse cutting

GND (GG Chipbreaker)

GND (ML Chipbreaker)

Conventional Tool

Part Material: Structural Steel Holder: GNDLR2525M-320, Insert: GCMN3002-GG Cutting Conditions: v c = 330 SFM, f = 0.0059 IPR, a p = 0.472", Wet

Part Material: Structural Steel Holder: GNDMR2525M-312, Insert: GCMN3002-ML Cutting Conditions: v c = 330 SFM, f = 0.0039 IPR, a p = 0.0197", Wet

Cut-off

Profiling

GND (RG Chipbreaker)

GND (CG Chipbreaker)

Conventional Tool

Competitor's Product

Part Material: Stainless Steel ( ø30mm ) Holder: GNDLR2525M-220, Insert: GCMR2002-CG-05 Cutting Conditions: v c = 330 SFM, f = 0.0059 IPR, Wet

Part Material: Structural Steel Holder: GNDMR2525M-312, Insert: GCMN3015-RG Cutting Conditions: v c = 330 SFM, f = 0.0019 IPR, a p = 0.0039", Wet

GND Series - New Products

Ŷ Internal Coolant Holder GNDM-J / GNDL-J

Ɣ Series expansion of Grooving Series GND with internal coolant holders Ɣ Available seat sizes / grooving widths from .079” (2.0mm) to .236” (6.0mm) Ɣ Effective coolant supply to the cutting edge during grooving, achieving both high-efciency high-speed machining and longer insert tool life Ɣ Improved chip control through direct coolant supply around the cutting edge

Ɣ Wear Resistance

.002 .004 .006 .008 .010

Conventional Tool

GNDM-J 1000 PSI

Coolant hole at the top improves chip control

Ɣ Ɣ Ɣ

Ɣ Ɣ Ɣ Ɣ

Tool Life: 7 Times Longer!

Ŷ Ɣ

Coolant hole at the bottom effectively suppresses wear

Number of Machined Grooves

Ɣ Chip control

Coolant Pressure: 1000 PSI

Coolant Pressure: 145 PSI

External Coolant Supply

Part Material: Titanium Alloy Holder: GNDM R2525K-312J Insert: GCMN3002-GG (AC530U) Cutting Conditions: v c = 200 SFM, f = 0.0039 IPR, a p = .197” Wet

Ŷ CF Chipbreakers for Cut-Off Machining

Ɣ Chipbreakers with front cutting edge angles 10°/15° for cut-off machining now available Ɣ Asymmetric breaker design demonstrates outstanding chip control even on inserts with front cutting edge angles, where chip control is typically difcult

Right hand insert shown

10°/15°

GCMR20003-CF-10

GCMR20003-CF-15

Competitor's Product

Part Material: Structural Steel Holder: GNDM R2525M-220 Insert: GCMR20003-CF-10,15 (AC1030U) Cutting Conditions: n = 2000 RPM, f = 0.0031” Wet

GND Series - Chipbreakers

■ Large Selection of chipbreakers ensure outstanding chip control performance in many different types of applications.

Grooving / Cut-off

Grooving / Traverse Cutting

General-Purpose

Low Feed

General-Purpose

Low Feed

Low Cutting Force

1st recommendation for grooving

For low cutting force and chip control at low-feeds

Standard chipbreaker for traverse cutting

For low-feed chip control

Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section

0.05

0.10

2.0 5.0 8.0

15°

20°

30°

3.0 6.0

Seat Size

1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0

Stock

AC8025P AC8035P AC830P AC425K AC5015S AC5025S AC520U AC530U T2500A AC1030U H10

Proling

Cut-off

Proling Necking

For Non-Ferrous Metals

Low Cutting Force

General-Purpose

1st recommendation for cut-off machining For low-feed chip control

For external proling and radius grooving

For facing, internal proling, radius grooving and necking

Ideal for aluminum alloy machining

Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section Cutting Edge Cross Section

Lead Angle: 5°

Lead Angle: 10° / 15°

0.05

25°

20°

Seat Size

1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0

Stock

AC8025P AC8035P AC830P AC425K AC5015S AC5025S AC520U AC530U T2500A AC1030U H10

Lead Angle: 10° / 15° AC8025P AC8035P AC830P AC425K AC5015S AC5025S AC520U AC530U T2500A AC1030U H10

AC8025P AC8035P AC830P AC425K AC5015S AC5025S AC520U AC530U T2500A AC1030U H10

Lead Angle: 5°

Items in grey are not available

GND Series - Chipbreaker Selection Guide

■ Chipbreaker Selection

Grooving/Traverse Cutting Grooving/Traverse Cutting

Grooving Grooving

Cut-off Cut-off

GG GG

GG General-purpose GG General-purpose

MG General-Purpose General-Purpose

General-Purpose General-Purpose

Improved Chip Control Improved Chip Control

Ni B Burr Reduction Ni B Burr Reduction

Improved Chip Control Improved Chip Control

Chipping Prevention Chipping Prevention

Improved Chip Control Improved Chip Control

GL GL

CG General-Purpose CG General-Purpose Feed Direction Front Cutting Edge Angle 5° Feed Direction Front Cutting Edge Angle 5°

GL General-Purpose GL General-Purpose Chip Control Emphasized Chip Control Emphasized

ML Low Feed Chip Control Emphasized Chip Control Emphasized ML Low Feed

Chip Control Emphasized General-Purpose Chip Control Emphasized General-Purpose

Improved Chip Control Improved Chip Control

Reduced Chattering Reduced Chattering

Ni B Burr Reduction Ni B Burr Reduction

Improved Chip Control Improved Chip Control

Reduced Chattering Reduced Chattering

Chipping Countermeasures Chipping Countermeasures

Chipping Prevention Chipping Prevention

GF Low Resistance GF Low Resistance

CF Low Resistance Feed Direction Front Cutting Edge Angle 10°/15° Feed Direction Front Cutting Edge Angle 10°/15° CF Low Resistance

Facing / Internal Proling / Radius Grooving / Necking Facing / Internal Proling / Radius Grooving / Necking

External Proling/External Radius Grooving External Proling/External Radius Grooving

For Non-Ferrous Metals For Non-Ferrous Metals

RG General-Purpose RG General-Purpose

RN General-Purpose 2nd Recommended 2mm Width Supported RN General-Purpose 2nd Recommended 2mm Width Supported

RN General-Purpose RN General-Purpose

GA General-purpose For Non-Ferrous Metals GA General-purpose For Non-Ferrous Metals

1st Recommended 1st Recommended

■ Insert Grade Selection

Steel

Stainless Steel

Cast Iron

Exotic Alloy

Non-ferrous Metal

Application

AC425K 1st Recommendation

(AC520U) AC5025S PVD PVD AC5015S (AC830P) AC8035P CVD PVD AC530U AC1030U 1st Recommendation

(AC520U) AC5025S PVD (AC830P) AC8035P CVD AC8025P CVD

AC5015S

CVD

Cermet T2500A Surface Finish Emphasised

AC5015S PVD AC8025P CVD (AC520U) AC5025S PVD PVD AC530U AC1030U

PVD

(AC520U) AC5025S 1st Recommendation

1st Recommendation

H10

PVD

AC530U AC1030U

AC530U /AC1030U 1st Recommendation

Uncoated Carbide

PVD

See page 20 for details on BN7500

Only AC520U and AC1030U inserts are stocked for GNDIS holders.

GND Series - Holders

For External Turning (For Small Lathes)

Traverse Cutting / Proling (Cut-off)

Grooving / Cut-off (Traverse Cutting)

Shank Size (H x W) .375” x .375” .500” x .500” .625” x .625” GNDL Straight Type

GNDM Straight Type

GNDM-J Straight Type

GNDL-J Straight Type

Internal Coolant Supply

Shank Size (H x W) .500” x .500” .625” x .625”

Shank Size (H x W) .625” x .625”

10 × 10mm 12 × 12mm 16 × 16mm 20 × 12mm

12 × 12mm 16 × 16mm 20 × 12mm

16 × 16mm 20 × 12mm

16 × 16mm 20 × 12mm P21

P22

P21

P22

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 MG ML GG GL GF CG CF RG RN GA Applicable Chipbreaker

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA

For External Turning For Small Lathes Series Overview

MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose GL : Grooving / Low-feed

GF : Grooving / Low cutting force GA : Non-ferrous Metal / General-purpose

CG : Cut-off / General-purpose

CF : Cut-off / Low cutting force

RG : Proling / General-purpose RN : Facing / Necking / General-purpose

Shank Size (Inch)

Applicable Chipbreakers

Seat Size

Maximum Groove Depth (Inch)

Ref. Page

Series

MG ML GG GL GF CG CF RG RN GA

.197 .394 .591 .787 1.000 1.181

Width (B)

1.251.52 3 4 5 6 7 8

Height (H)

G G G G G G G G G G G G G G G G G G

.375 .375 .375

1.251.5

P21 P21 P21 P21 P21 P22 P21 P22 P21 P21 P21 P22 P21 P22 P21 P22 P21 P22

S S S S S S G G S S G G S S

G G G G G G G G G G G G G G

G S G G S S G G G G S S S S

G G G G G G G G G G G G G G

GNDL

.375 .375

GNDL GNDL GNDL-J GNDL GNDL-J GNDM GNDL GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J

1.251.5

.500 .500 .500 .500 .500

2 2

.500 .500

Internal Coolant Supply

S S

G G

3 3

Internal Coolant Supply

.375

1.5 1.5

.500

.472 .472

2 2 2 2

Internal Coolant Supply

.625 .625

Internal Coolant Supply

G G S S

G G G G

.472 .472

3 3 3 3

Internal Coolant Supply

.625 .625

Internal Coolant Supply

Shank Size ( mm )

Maximum Groove Depth ( mm )

Applicable Chipbreakers

Seat Size

Ref. Page

Series

MG ML GG GL GF CG CF RG RN GA

1.251.52 3 4 5 6 7 8

Height (H)

Width (B)

G G G G G G G G G G G G G G G G G G G G G G G G G G G

10 10 10

1.251.5

P21 P21 P21 P21 P21 P22 P21 P22 P21 P21 P21 P21 P22 P21 P22 P21 P22 P21 P22 P21 P22 P21 P22 P21 P22 P21 P22

S S S S S S G G S S G G S S G G S S G G S S

G G G G G G G G G G G G G G G G G G G G G G

G S G G S S G G G G S S S S G G G G S S S S

G G G G G G G G G G G G G G G G G G G G G G

GNDL

10 10

12 12.5 12.5 12.5 12.5

GNDL GNDL GNDL-J GNDL GNDL-J GNDM GNDL GNDM GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J

1.5

1.25

2 2

12 12

Internal Coolant Supply

S S

G G

3 3

Internal Coolant Supply

1.25 1.25

12.5

1.5 1.5

12 12

2 2 2 2

Internal Coolant Supply

16 16

Internal Coolant Supply

G G S S

G G G G

12 12

3 3 3 3

Internal Coolant Supply

16 16

Internal Coolant Supply

17 17

2 2 2 2

Internal Coolant Supply

21 21

Internal Coolant Supply

G G S S

G G G G

17 17

3 3 3 3

Internal Coolant Supply

21 21

Internal Coolant Supply

G : Best S : Suitable

: In Stock

GND Series - Holders

Traverse Cutting / Proling (Cut-off)

*Single Sided Insert Grooving/Cut-off (Horizontal Feed) GNDXL

Grooving / Cut-off (Traverse Cutting)

GNDM Straight Type

GNDL Straight Type

GNDM-J Straight Type

GNDL-J Straight Type

GNDS Straight Type

Internal Coolant Supply

For Shallow Grooves

Internal Coolant Supply

Shank Size (H x W) .750” x .750” 1.00” x 1.00” 1.25” x 1.25”

Straight Type

GNDXL: For Outer Diameter Machining (Straight Type) Groove Depth ~1.260”/ 32mm )

For External Turning (Straight Type)

Shank Size (H x W) .750” x .750” 1.00” x 1.00”

20 × 20mm 25 × 25mm 32 × 25mm 32 × 32mm

20 × 20mm 25 × 25mm 32 × 25mm 32 × 32mm P23

Shank Size (H x W) 20 × 20mm 25 × 25mm

20 × 20mm 25 × 25mm

P31

P30

P24

P25

P26

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA

Seat Size

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA

2.0 3.0 4.0 5.0 6.0 Applicable Chipbreaker ML GF RN

For External Turning Straight Type Series Overview

MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose GL : Grooving / Low-feed

GF : Grooving / Low cutting force GA : Non-ferrous Metal / General-purpose

CG : Cut-off / General-purpose

CF : Cut-off / Low cutting force

RG : Proling / General-purpose RN : Facing / Necking / General-purpose

Shank Size (Inch)

Seat Size

Maximum Groove Depth (Inch)

Applicable Chipbreakers

Ref. Page

Series

.197 .394 .591 .787 1.000 1.181

MG ML GG GL GF CG CF RG RN GA

Height (H) Width (B) 1.251.5 2 3 4 5 6 7 8

G G S S G G S S G G S S G G S S G S G S G S G S

G G G G G G G G G G G G G G G G G G G G G G G G

.500 .500

2 2 2 2

P23 P24 P25 P26 P23 P24 P25 P26 P23 P24 P25 P26 P23 P24 P25 P26 P23 P25 P23 P25 P23 P25 P23 P25

GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J GNDM GNDM-J GNDL GNDL-J GNDM GNDL GNDM GNDL GNDM GNDL GNDM GNDL

Internal Coolant Supply

G G G G G G G G G G

G G G G G G

G G G G G S S S S S S S S S S S S S S

G G G G G G G G G G G G G G G G G G G

.750 .750

Internal Coolant Supply

G G S S G G S S G G S S G S G S G S G S

G G G G G G G G G G G G G G G G G G G G

.500 .500

3 3 3 3

.750 1.00

Internal Coolant Supply

.750 .750

Internal Coolant Supply

4 4 4 4

.700 .700

Internal Coolant Supply

1.000 1.000

Internal Coolant Supply

.700 .700

5 6 5 6 5 6

Internal Coolant Supply

1.000 1.000

Internal Coolant Supply

G G G G

G G

.500

3 3

.900

.700

4 4

1.000

1.250 1.250

.700

1.000

5 6

.700

7 8 7 8

1.000

Shank Size ( mm )

Maximum Groove Depth ( mm )

Seat Size

Applicable Chipbreakers

Ref. Page

Series

MG ML GG GL GF CG CF RG RN GA

Height (H)

Width (B)

1.251.52 3 4 5 6 7 8

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

GNDM GNDL GNDS GNDM GNDM-J GNDL GNDL-J GNDS GNDM GNDM-J GNDL GNDL-J GNDS GNDM GNDM-J GNDL GNDL-J GNDS GNDM GNDM-J GNDL GNDL-J GNDM GNDL GNDM GNDL GNDM GNDL GNDM GNDL GNDM GNDL

1.251.5 1.251.5

P23 P25 P30 P23 P24 P25 P26 P30 P23 P24 P25 P26 P30 P23 P24 P25 P26 P30 P23 P24 P25 P26 P23 P25 P23 P25 P23 P25 P23 P25 P23 P25

G G G S S G G G S S G G G S S G G G S S G S G S G S G S G S

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

G G G G G G G G G G G G G G G

G G G G G G G G G G

G G G G G S S S S S S S S S S S S S S S S S S S S S

G G G G G G G G G G G G G G G G G G G G G G G G G G

2 2 2 2 2

10 10

Internal Coolant Supply

20 20

Internal Coolant Supply

G G G S S G G G S S G G G S S G S G S G S G S G S

G G G G G G G G G G G G G G G G G G G G G G G G G

3 3 3 3 3

12 12

Internal Coolant Supply

20 20

20 25

Internal Coolant Supply

4 4 4 4 4

18 18

Internal Coolant Supply

25 25

Internal Coolant Supply

18 18

5 6 5 6 5 6 5 6

Internal Coolant Supply

25 25

Internal Coolant Supply

7 8

G G G G

G G

3 3

4 4

32 32

25 32

5 6

7 8

Straight Series for Outer Diameter Machining (Groove Depth ~1.260” / 32mm )

: In stock *: Made-to-order item (Shank size ¨32 x 25mm)

ML Multi-Functional / General-Purpose GF Grooving / Low Cutting Force RN Facing / Necking / General-Purpose

Shank Size (Inch)

Maximum Groove Depth (Inch)

Seat Size

Applicable Chipbreakers (GNDXL Only)

Ref. Page

Series

Height (H)

.197 .394 .591 .787 1.000 1.181 1.378

2 3 4 5 6 Width (B)

S S

G G

S S

P31 P31

1.023

.750 1.00

GNDXL

1.260

3 4 5 6

Shank Size ( mm ) Height (H) Width (B)

Seat Size

Applicable Chipbreakers (GNDXL Only)

Maximum Groove Depth ( mm )

Ref. Page

Series

2 3 4 5 6

G : Best S : Suitable

S S

G G

S S

P31 P31

20 25

GNDXL

3 4 5 6

Available (USA or WWW)

Made to Order Item Note: Only the dedicated one-corner insert (insert part number ending with “1”) can be used with the GNDXL.

G : Best S : Suitable

GND Series - Holders

For External Turning (L Type)

Traverse Cutting / Proling (Cut-off)

Grooving / Cut-off (Traverse Cutting)

Shank Size (H x W) .750” x .750” 1.000” x 1.000” GNDMS L Type 20 × 20mm 25 × 25mm Shank Size (H x W) .750” x .750” 1.000” x 1.000” P24 GNDMS L Type

Shank Size (H x W) .750” x .750” 1.000” x 1.000” GNDLS L Type 20 × 20mm 25 × 25mm Shank Size (H x W) .750” x .750” 1.000” x 1.000” P26 GNDLS L Type

Traverse Cutting / Proling (Cut-off)

Grooving / Cut-off (Traverse Cutting)

For External Turning L Type Series Overview For External Turning L Type Series Overview ML : Multi-functional / Low-feed CF : Cut-off / Low cutting force

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker 20 × 20mm 25 × 25mm P26 MG ML GG GL GF CG CF RG RN GA

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker Seat Size MG ML GG GL GF CG CF RG RN GA 20 × 20mm 25 × 25mm P24

MG : Multi-functional / General-purpose CG : Cut-off / General-purpose GL : Grooving / Low-feed MG : Multi-functional / General-purpose RN : Facing / Necking / General-purpose CG : Cut-off / General-purpose GL : Grooving / Low-feed RN : Facing / Necking / General-purpose

GG : Grooving / General-purpose RG : Proling / General-purpose GG : Grooving / General-purpose RG : Proling / General-purpose

GF : Grooving / Low cutting force GA : Non-ferrous Metal / General-purpose ML : Multi-functional / Low-feed CF : Cut-off / Low cutting force GF : Grooving / Low cutting force

Shank Size (Inch) Shank Size (Inch)

Maximum Groove Depth (Inch) GA : Non-ferrous Metal / General-purpose

Applicable Chipbreakers

Ref. Page Ref. Page

Series

.197 .394 .591 .787 1.000 1.181

MG ML GG GL GF CG RG RN GA CF Applicable Chipbreakers MG ML GG GL GF CG RG RN GA

Height (H) Width (B)1.251.5 2 3 4 5 6 7 8

Seat Size

Maximum Groove Depth (Inch)

G G G G G G G G G G G G G

S G S G G S G S G S G S S G S G G S G S G S G S S

G G G G G G G G G G G G G

G G G G G G G G G

G G G CF

G S S S S G S S S S S S S

G G G G G G G G G G G G G

GNDLS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS Series

.600

P26 P24 P26 P24 P24 P26 P24 P26 P24 P26 P24 P26 P26 P24 P24 P26 P26 P24 P26 P24 P26 P24 P26 P24 P26 P24 P26 P24 P26 P24 P26

G S G G G S G S G S S

G G G G G G G G G G G

.400

3 3

.197 .394 .591 .787 1.000 1.181

Height (H) Width (B)1.251.5 2 3 4 5 6 7 8

.600 .600

.750 .750

.500

G G

4 4

.400

3 3

.700

S G

.600

.750 .750

G G G

.500 .500

4 4

.700 .700

.500 .500

3 3

.700 .700

1.00 1.00

G G

.550

4 4

.500

3 3

.900

G G

.700

1.00 1.00

.500 .550

5 6 5 6 5 6 5 6

4 4

.900 .900

G S S

G G

S S

G G

.500

Series GNDMS GNDLS

Shank Size ( mm ) Shank Size ( mm )

Maximum Groove Depth ( mm )

Applicable Chipbreakers

Seat Size

Ref. Page Ref. Page

.900

MG ML GG GL GF CG RG RN GA CF Applicable Chipbreakers MG ML GG GL GF CG RG RN GA

Height (H)

Width (B)

1.251.52 3 4 5 6 7 8

Maximum Groove Depth ( mm )

Seat Size

G G G G G G G G G G G G

G G G G G G G G G

G G G CF

G S S S S G S S S S S S

G G G G G G G G G G G G

GNDLS GNDMS GNDLS GNDMS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS GNDMS GNDLS Series GNDLS GNDMS GNDMS GNDLS

G S G G G S G S G S

G G G G G G G G G G

3 3

Height (H)

Width (B)

1.251.52 3 4 5 6 7 8

20 20

12 12

G G

3 3

S G

20 20

G G G

3 3

25 25

G G

4 4

3 3

G G

5 6 5 6 5 6 5 6

25 25

4 4

G S

G G

S S

G G

G : Best S : Suitable

: In Stock

Grooving / Cut-off / Traverse Cutting / Proling 23 For External Turning (SUMIBORON Cassette)

G : Best S : Suitable

: In Stock

Applicable Holders SumiPolygon GND00 (Straight) GND90 (L-Shaped) Applicable Holders SumiPolygon GNDCM Cassette GNDCM Cassette P29

Grooving / Cut-off / Traverse Cutting / Proling

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker GND00 (Straight) GND90 (L-Shaped) P29 MG ML GG GL GF CG CF RG RN GA

Seat Size SumiPolygon Cassette Series Overview SumiPolygon Cassette Series Overview

MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose GL : Grooving / Low-feed

GF : Grooving / Low cutting force GA : Non-ferrous Metal / General-purpose GF : Grooving / Low cutting force GA : Non-ferrous Metal / General-purpose

CG : Cut-off / General-purpose

CF : Cut-off / Low cutting force

RG : Proling / General-purpose RN : Facing / Necking / General-purpose

Applicable SumiPolygon Holders Applicable SumiPolygon Holders GND00 GND90 GND00 GND90

MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose GL : Grooving / Low-feed

Maximum Groove Depth ( mm )

Applicable Chipbreakers

Ref. Page Ref. Page P29 P29 P29 P29 P29 P29

Series CG : Cut-off / General-purpose

CF : Cut-off / Low cutting force

RG : Proling / General-purpose RN : Facing / Necking / General-purpose

MG ML GG GL GF CG RG RNGA CF Applicable Chipbreakers MG ML GG GL GF CG RG RNGA

1.251.52 3 4 5 6 7 8

Maximum Groove Depth ( mm )

Seat Size

G G G G

G G G

G G CF G G

G S S S

G G G G

12 12

Series

G G G

1.251.52 3 4 5 6 7 8

GNDCM

18 18

12 12

G G

5 6

GNDCM

G : Best S : Suitable

G G

S S

G G

: In Stock

18 18

5 6

G : Best S : Suitable

: In Stock

GND Series - Holders

For Facing For Facing

Grooving / Traverse Cutting / Proling Grooving / Traverse Cutting / Proling

For Facing

For Facing Straight / L Type Series Overview MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose MG : Multi-functional / General-purpose ML : Multi-functional / Low-feed GG : Grooving / General-purpose For Facing Straight / L Type Series Overview RG : Proling / General-purpose CF : Cut-off / Low cutting force CG : Cut-off / General-purpose GL : Grooving / Low-feed GF : Grooving / Low cutting force RG : Proling / General-purpose CF : Cut-off / Low cutting force CG : Cut-off / General-purpose GL : Grooving / Low-feed GF : Grooving / Low cutting force RN : Facing / Necking / General-purpose GA : Non-ferrous Metal / General-purpose RN : Facing / Necking / General-purpose GA : Non-ferrous Metal / General-purpose

Shank Size (H x W) .750” x .750” 1.000” x 1.000” GNDF Straight Type

GNDFS L Type GNDFS L Type

Shank Size (H x W) .750” x .750” 1.000” x 1.000” GNDF Straight Type

Shank Size (H x W) 25mm × 25mm 32mm × 32mm Shank Size (H x W) 25mm × 25mm 32mm × 32mm

P32

20mm × 20mm 25mm × 25mm

P33

P34 P34

P33

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA MG ML GG GL GF CG CF RG RN GA Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA CG CF RG RN GA Seat Size

Shank Size (Inch)

Seat Size

Maximum Groove Depth (In.) Max. Work Diameter (In.) Maximum Groove Depth (In.) Max. Work Diameter (In.)

Applicable Chipbreakers

Ref. Page

Seat Size

Applicable Chipbreakers

Ref. Page

Series

MG ML GG GL GF CG CF RG RN GA G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G MG ML GG GL GF CG CF RG RN GA G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G Applicable Chipbreakers MG ML GG GL GF CG CF RG RN GA G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G Applicable Chipbreakers MG ML GG GL GF CG CF RG RN GA G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G : Best G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

5 1015202530 5 1015202530

50 100 150 200 250 300 1,000 50 100 150 200 250 300 1,000

Height H WidthB3 4 5 6 7 8 Height H WidthB3 4 5 6 7 8

.500 .500 .500 .500

P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32

3 3 3 3 3 3 3

P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32 P32

ø1.378 ø1.772 ø1.575 ø2.165 ø1.969 ø2.756 ø2.559 ø3.937 ø1.378 ø1.772 ø1.575 ø2.165 ø1.969 ø2.756

3 3 3 3 3 3 3

.700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700

GNDF

ø2.559 ø3.937 ø3.543 ø5.906

ø3.543 ø5.906

ø5.512 ø7.874

ø5.512 ø7.874 ø7.087

ø11.811

4 4 4 4 4 4 4

ø7.087

ø11.811

ø1.575 ø2.165 ø1.969 ø2.756 ø2.559 ø3.543 ø2.559 ø3.543 ø3.346 ø5.118 ø1.575 ø2.165 ø1.969 ø2.756

4 4 4 4 4 4 4

.900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900 .900

GNDF

.750 1.00

ø3.346 ø5.118 ø4.921

ø7.874

.750 1.00

ø7.087

ø11.811

ø4.921

ø7.874

ø11.024 ø39.370

ø7.087

ø11.811

5 5 5 5 5 5

ø1.969 ø2.756 ø2.559 ø3.543 ø1.969 ø2.756 ø2.559 ø3.543

ø11.024 ø39.370

5 5 5 5 5 5

ø3.346 ø5.118

GNDF

ø4.921

ø7.874

ø3.346 ø5.118

GNDF

ø7.087

ø11.811

ø4.921

ø7.874

ø11.024 ø39.370

ø7.087

ø11.811

6 6 6 6 6

ø1.969 ø2.953 ø2.756 ø4.331 ø7.087 ø1.969 ø2.953 ø2.756 ø4.331

ø11.024 ø39.370

6 6 6 6 6

GNDF

ø3.397 ø7.874

ø11.811

GNDF

ø3.397 ø7.874

ø11.024 ø39.370

ø7.087

ø11.811

Shank Size ( mm )

Maximum Groove Depth ( mm ) Max. Work Diameter ( mm )

Seat Size

Ref. Page

Series

ø11.024 ø39.370

5 1015202530

50 100 150 200 250 300 1,000

Height H WidthB3 4 5 6 7 8

Shank Size ( mm )

Maximum Groove Depth ( mm ) Max. Work Diameter ( mm )

Seat Size

Ref. Page

12 12

P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P34 P34 P34 P34 P34 P34 P34 P34 P34 P34

3 3 3 3 3 3 3

Series

ø35 ø45 ø40 ø55

5 1015202530

50 100 150 200 250 300 1,000

Height H WidthB3 4 5 6 7 8

18 18 18 18 18 18 18 18 18 18 18 18

12 12

P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P33 P34 P34 P34 P34 P34 P34 P34 P34 P34

ø35 ø45 ø40 ø55 ø50 ø70

3 3 3 3 3 3 3

GNDF

ø65 ø100

ø90 ø150

ø50 ø70

ø140 ø200

GNDF

ø65 ø100

ø180

ø300

ø90 ø150

4 4 4 4 4 4 4

ø40 ø55

23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23

ø140 ø200

ø50 ø70

ø180

ø300

ø65 ø90

4 4 4 4 4 4 4

GNDF

ø40 ø55

ø85 ø130

ø50 ø70 ø125

20 25

ø200

ø65 ø90

ø180

ø300

GNDF

ø280 ø1,000

ø85 ø130

5 5 5 5 5 5

ø50 ø70

20 25

ø125

ø200

ø65 ø90

ø180

ø300

ø85 ø130

GNDF

ø280 ø1,000

5 5 5 5 5 5

ø50 ø70 ø125

ø200

ø180

ø300

ø65 ø90

ø280 ø1,000

ø85 ø130

GNDF

6 6 6 6 6 6 6 6 6 6

ø50 ø75

ø125

ø200

ø70 ø110

ø180

ø300

GNDF

ø100 ø200

ø280 ø1,000

ø180

ø300

6 6 6 6 6 6 6 6 6 6

ø50 ø75

ø280 ø1,000

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

ø70 ø110 ø70 ø100

GNDF

ø100 ø200 ø100 ø200

GNDFS

ø180

ø300

ø180

ø300

ø280 ø1,000 ø450 up

ø280 ø1,000

20 25

ø70 ø100

8 8 8 8 8

ø70 ø100

ø100 ø200 ø180 ø100 ø200

GNDFS

ø300

GNDFS

ø180

ø280 ø1,000 ø450 up ø300

20 25

ø280 ø1,000 ø450 up

8 8 8 8

ø70 ø100

: In Stock

: Made-to-order item

ø100 ø200 ø180

GNDFS

ø300

GND Series - Holders

Grooving / Traverse Cutting / Proling For Internal Boring (Work Dia.: ø14mm up)

For Internal Boring ( Work Dia.: ø32mm up)

Grooving / Traverse Cutting / Proling

Shank Dia. 1.000” 1.250” 1.500” GNDI Straight Type

GNDIS Straight Type

Shank Dia. ø12mm ø16mm ø20mm

ø25mm ø32mm ø40mm

P36

P35

Seat Size

MG ML GG GL GF CG CF RG RN GA 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker

1.5 2.0 3.0

Applicable Chipbreaker ML GF

Inserts are dedicated products.

Internal Boring Series Overview (Work Diameter: ø 14mm up)

ML : Multi-functional / Low-feed GF : Grooving / Low cutting force

Shank Size DCON ( mm )

Maximum Groove Depth ( mm ) 5 1015202530

Applicable Chipbreakers (GNDIS Type Dedicated) ML (GNDIS Type Dedicated) GF (GNDIS Type Dedicated)

Seat Size 1.5 2 3

Ref. Page

Min. Bore Dia. ( mm )

Series

G G G G G G G G G G

2.6

ø14 ø14 ø14 ø14

1.5 1.5

P36 P36 P36 P36 P36 P36 P36 P36 P36 P36

3.6

GNDIS

ø12

G G

2.6

2 3 2 3

3.6 3.6

ø16

1.5 1.5

4.6

ø20

GNDIS

ø16

G G G

3.6

ø16

2 3 2 3

4.6

ø20

6.6 6.6

ø25 ø25

1.5

GNDIS

ø20

2 3

G : Best

: In Stock

Note: Only dedicated GXM inserts can be used for GNDIS types.

Internal Boring Series Overview (Work Diameter: ø1.25” / ø32mm up)

MG : Multi-functional / General-purpose ML :Multi-functional / Low-feed GG :Grooving / General-purpose GL : Grooving / Low-feed

GF :Grooving / Low cutting force GA :Non-ferrous Metal / General-purpose

CG : Cut-off / General-purpose

CF :Cut-off / Low cutting force

RG :Proling / General-purpose RN : Facing / Necking / General-purpose

ø1.000 ø1.250 ø1.500 Shank Size DCON (Inch) Shank Size DCON ( mm )

Maximum Groove Depth (In.)

Applicable Chipbreakers

Seat Size

Ref. Page

Series

Min. Bore Dia. (In.)

MG ML GG GL GF CG CF RG RN GA

5 1015202530 .250 .250

2 3 4 5 6

G G G G

S S S S

G G G G

ø1.250 ø1.250

P35 P35 P35 P35

GNDI GNDI GNDI

S S S

3 4 5 2 3 4 5

3 4 5 6 6 6

.400 .430

ø1.575

ø2.000

Maximum Groove Depth ( mm )

Applicable Chipbreakers

Seat Size

Ref. Page

Min. Bore Dia. ( mm )

Series

MG ML GG GL GF CG CF RG RN GA

5 1015202530 6 6

2 3 4 5 6

G G G G G

S S S S S

G G G G G

ø32 ø32 ø32

P35 P35 P35 P35 P35

GNDI

ø25

S S S

3 4 5

GNDI GNDI

ø32 ø40

ø40

3 4 5 3 4 5 6

ø50

G : Best S : Suitable

: In Stock

Necking For Necking

GNDN Straight Type

Shank Size (H x W) 20 × 20mm 25 × 25mm

P30

Seat Size 1.25 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Applicable Chipbreaker MG ML GG GL GF CG CF RG RN GA

Necking Series Overview

MG : Multi-functional / General-purpose ML :Multi-functional / Low-feed GG :Grooving / General-purpose GL : Grooving / Low-feed

GF :Grooving / Low cutting force GA :Non-ferrous Metal / General-purpose

CG : Cut-off / General-purpose

CF :Cut-off / Low cutting force

RG :Proling / General-purpose RN : Facing / Necking / General-purpose

Shank Size ( mm ) Height H Width B

Applicable Chipbreakers

Maximum Groove Depth ( mm )

Seat Size

Ref. Page

Min. Bore Dia. ( mm )

Series

G : Best

MG ML GG GL GF CG CF RG RN GA

5 1015202530

2 3 4 5 6

G G G G G

1.5

ø20 ø20

P30 P30 P30 P30 P30

2.0

20 25

GNDN

3.0

ø30 ø30 ø30

3.5

4.0

Necking Depth

: In Stock

GND Series - Recommended Cutting Conditions Recommended Cutting Conditions

.049 / 1.25 Seat Size Grooving Width (Inch/ mm ) .059 / 1.50

Corner Radius (Inch)

Applicable Insert

Grooving / Cut-off (Necking)

Traverse Cutting

.0020

MG ML GG GL GF CG CF RG RN GA

.004 .008 .012 .016 .020 .024

Feed Rate f (IPR)

MG ML GG GL GF CG CF RG RN GA

.0020

.004 .008 .012 .016 .020 .024

Feed Rate f (IPR)

.16

.0012

MG ML GG GL GF CG CF RG RN GA

ML GG GL GF CG CF RN GA

.12

.079 / 2.0

.0078

MG ML GG GL GF CG CF RG RN GA

.08

.0156

MG ML GG GL GF CG CF RG RN GA

.04

.004 .008 .012 .016 .020 .024

.004 .008 .012 .016 .020 .024 .028

Feed Rate f (IPR)

.0394

MG ML GG GL GF CG CF RG RN GA

Feed Rate f (IPR)

MG ML GG GL GF CG CF RG RN GA MG ML GG GL RG RN GA GF CG MG ML GG GL RG RN GA GF MG ML GG GL RG RN GA GF

.16

.0012

MG ML GG GL GF CG CF RG RN GA

.12

.118 / 3.0

.0078

MG ML GG GL GF CG CF RG RN GA

.08

ML MG

RG/RN

.0156

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024 .028

.0590

MG ML GG GL GF CG CF RG RN GA

.16

.0078

MG ML GG GL GF CG CF RG RN GA

.12

.157 / 4.0

.0156

MG ML GG GL GF CG CF RG RN GA

ML MG

.08

RG/RN

.0313

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024 .028

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

.0787

MG ML GG GL GF CG CF RG RN GA

.16

.0078

MG ML GG GL GF CG CF RG RN GA

.12

ML MG

.197 / 5.0

.0156

MG ML GG GL GF CG CF RG RN GA

RG/RN

.08

.0313

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024 .028

.0984

MG ML GG GL GF CG CF RG RN GA

.16

.0078

MG ML GG GL GF CG CF RG RN GA

.12

.236 / 6.0

.0156

MG ML GG GL GF CG CF RG RN GA

RG/RN

.08

.0313

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024 .028

.1181

MG ML GG GL GF CG CF RG RN GA

.16

.0078

MG ML GG GL GF CG CF RG RN GA

MG ML GG GL RG GF

.12

.275 / 7.0

.0156

MG ML GG GL GF CG CF RG RN GA

.08

.0313

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024 .028

.1378

MG ML GG GL GF CG CF RG RN GA

.16

.0078

MG ML GG GL GF CG CF RG RN GA

MG ML GG GL RG GF

.12

.0156

.315 / 8.0

MG ML GG GL GF CG CF RG RN GA

.08

.0313

MG ML GG GL GF CG CF RG RN GA

.04

Feed Rate f (IPR) 0 .004 .008 .012 .016 .020 .024

Feed Rate f (IPR) 0 .004 .008 .012 .016 0.020 .024 .028

.1575

MG ML GG GL GF CG CF RG RN GA

*Items in grey are not available

For face grooving, use cutting conditions closer to the lower limit of the recommended cutting conditions to ensure that chips are long. In cut-off applications, reduce the feed rate to around 30% to 50% near the center of the workpiece.

As there is less space for chip evacuation when machining internal diameters (particularly small bore diameters), ML/GL/GF chipbreakers are recommended. Modications to inserts and holders are required to perform machining such as radius grooving when using the RG chipbreaker with the GNDF holder for facing. ■ Recommended Cutting Conditions Recommended Cutting Conditions for GNDIS

P36

See next page for additional Recommended Cutting Conditions

S Exotic Alloy N Non-ferrous Metal

K Cast Iron

Part Material

M Stainless Steel

P Carbon Steel / Alloy Steel

AC5025S AC530U AC1030U

AC8035P AC830P

AC5015S AC520U

AC8025P

AC425K

T2500A AC8035P AC830P

AC8025P

H10

Insert Grades

260 to 650 260 to 820

260 to 660 260 to 650 165 to 650 165 to 650 230 to 500 230 to 500 165 to 500 260 to 660 200 to 660

500 to 990 165 to 660 65 to 265 65 to 200

Cutting Speed v (SFM)

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40

www.sumicarbide.com

Made with FlippingBook flipbook maker