GND-J - Parts & Connection Methods
Piping Method for Hoses and Connectors
Connector (Straight) J-MJIC1/4-NPT1/8M
Connector (Straight) J-MJIC1/4-NPT1/8M
Hose J-HOSE-FJIC1/4-FJIC1/4-8.0 J-HOSE-FJIC1/4-FJIC1/4-10.0
Machine
Internal Coolant Holder GNDM-J /GNDL-J J J
Thread 2
Thread 2
Thread 1
Thread 1
Thread 1
Connector (L-Shaped) J-MJIC1/4-NPT1/8M-90
Connector (L-Shaped) J-MJIC1/4-NPT1/8M-90
Thread 1
Thread 2
Thread 2
Thread 2
Thread 1
Thread 2
Thread 1
Hose J-HOSE-BSPT1/8M-BSPT1/8M-200 (Overall length 200mm) J-HOSE-BSPT1/8M-BSPT1/8M-300 (Overall length 300mm)
Machine
Internal Coolant Holder GNDM-J /GNDL-J J J
Thread 1
Thread 1
Thread 1
Thread 2
· GNDM-J / GNDL-J holders have a plug (XP0_) mounted on the holder back end at shipping. (See Fig. 1) When piping from the holder back end, mount a plug (XP0_) on the bottom of the holder for use. (See Fig. 2) · Apply sealant such as commercial sealing tape to the piping connection parts.
Plug XP0_
Plug XP0_
Fig. 2 Piping from back end
Fig. 1 Piping from bottom (at shipping)
Piping from back end
Piping from bottom
Parts (Plugs)
Parts (Cap Screw/ Wrench)
Dimensions ( mm )
Dimensions (mm)
Cat. No.
Stock
Description
Cat. No.
Stock
Description Cap Screw
Wrench Size
Thread Pitch
BX0520 LH040
XP02 XP03
● ●
● ●
Plug Plug
BSPT 1/8” NPT 1/8”
5mm Hex 5mm Hex
Wrench
Connectors are sold separately.
Connectors are sold separately.
Hoses
Fig 1
Fig 2
Fig 1
14
20
Width across Flats: 14 Width across Flats: 12
Thread 2
Thread 1
14
Thread 2
Thread 1
Thread 1
29
L
Thread 2
Parts (Connector)
Fig 2
Dimensions ( mm )
Width across Flats: 14 Width across Flats: 12
Cat. No.
StockAngle Thread 1 Thread 2 Fig
J-MJIC1/4-NPT1/8M J-MJIC1/4-NPT1/8M-90 J-FJIC1/4-BSPT1/8M J-MJIC1/4-5/16-24M J-MJIC1/4-M8X1M J-MJIC1/4-BSPP1/8M J-MJIC1/4-BSPT1/8M J-MJIC1/4-5/16-24M-90 Fig 1 Fig 2 Thread 1 Thread 1
1
MJIC1/4 NPT1/8 M
0°
Thread 2
Thread 1
Width across Flats: 14 Width across Flats: 12
●
90° MJIC 1/4 NPT1/8 M 2
Thread 2
FJIC1/4 BSPT1/8 M 1 MJIC1/4 5/16-24 M 1 MJIC1/4 M8 X 1 M 1 MJIC1/4 BSPP1/8 M 1 MJIC1/4 BSPT1/8 M 1
0° 0° 0° 0° 0°
L
L
Fig 3
PSZ Parts (Hose) Width across Flats: 14
Dimensions (inch / mm )
Cat. No. Stock L End 1 End 2 Fig J-HOSE-BSPT1/8M-BSPT1/8M-200 ● 200 BSPT1/8M BSPT1/8 M 2 J-HOSE-BSPT1/8M-BSPT1/8M-300 ● 300 BSPT1/8M BSPT1/8 M 2 J-HOSE-FJIC1/4-FJIC1/4-8.0 ● 8.0 FJIC 1/4 FJIC 1/4 1 J-HOSE-FJIC1/4-FJIC1/4-10.0 ● 10.0 FJIC 1/4 FJIC 1/4 1 J-HOSE-5/16-24M-5/16-24M-9.0 ● 9.0 5/16-24M 5/16-24M 2 J-HOSE-M8X1M-M8X1M-9.0 ● 9.0 M8X1 M M8X1 M 2 J-HOSE-BSPP1/8M-BSPP1/8M-9.0 ● 9.0 BSPP1/8 M BSPP1/8 M 2 Hoses are sold separately. L Width across Flats: 12 Thread 2 Thread 1 J-MJIC1/4-NPT1/8M-90
Width across Flats: 14 Width across Flats: 12
Thread 2
90° MJIC1/4 5/16-24 M 2 90° MJIC1/4 BSPP1/8 M 2
J-MJIC1/4-BSPP1/8M-90
L
Fig 3
Width across Flats: 14 J-MJIC1/4-NPT1/8M-90
Width across Flats: 12
Thread 2
L
Parts (Hose Assembly)
Thread 1
Dimensions (inch/ mm ) Thread 2 Fig
Cat. No.
Stock L Thread 1
J-ASSY-NPT1/8M-NPT1/8M-90-8.0 *
● 8.0 NPT1/8M NPT1/8 M (90deg) 3 J-ASSY-NPT1/8M-NPT1/8M-90-10.0 * ● 10.0 NPT1/8M NPT1/8 M (90deg) 3 * Required separately sold MJIC Connectors to connect to holder or machine
27
: Worldwide Warehouse Item ●: USA Stocked Item
12 & 13
Recommended Cutting Conditions
N m Recommended Tightening Torque (N·m)
Made with FlippingBook flipbook maker