Field Operation
USEFUL HINTS
• Cross working at 15 degrees off line gives better leveling and trash clearance. • Full ground disturbance starts at 63.5mm (2.5 inches). • Adjustment should be made to compensate for disc wear and concavity. TO IMPROVE WEED CONTROL AND FOR BETTER SOIL DISTURBANCE • Adjust lateral disc positioning. • Ensure machine is traveling in line. • Increase depth to cut. • Replace discs. BLOCKING IN EXCESSIVE TRASH • Lower rear discs gang to drive better in soil. • Adjust angle of lift soil deflector to allow greater flow.
• Try reducing speed slightly. CLOGGING IN WET SOILS • Raise working depth. • Raise front discs. • Give soil more time to dry out.
RAM STOP COMBINATIONS
NOTE- INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH
Figure : 4.2 Ram Stop Combinations.
4.34.3
2362P Fleximulch
OPERATOR & SAFETY MANUAL
2362P Op Book.indb 3
22/08/2022 5:50:47 PM
Made with FlippingBook - Online Brochure Maker