K Line Ag 2142F Speedbuster Operator Safety Manual

Field Operation

LATERAL FRONT DISC GANG POSITIONING

REAR VIEW OF DISC PROFILE

The disc positioning system is used for maximum soil disturbance, reduced ridging and weed control. Adjustment can also be made to compensate for disc wear. ADJUSTMENT PROCEDURE *NB - Be sure machine is tracking in line before attempting to make this adjustment. • Start with factory settings: 4. FIELD OPERATION - Front Disc Gang Lat- eral PositioningStandard Factory Setting. • Test run at normal operating speed and stop quickly. • Check for ridges of undug soil. Follow ridges into machine and identify which direction to adjust. See diagrams on this page • To remove any ridges, only adjust front side- ways in small increments ½” or 12mm. • Re-check in hard soils as Jump Arms tend to flex more. REMEMBER, FULL GROUND DISTURBANCE STARTS AT 2 ½” 60MM

Figure : 4.11 Rear Disc Gang Fixed Position

Adjustable Front Gang

Left

Right

Top Elevation

Soil Throw

Figure : 4.12 Adjustment Right.

Soil Throw

Move Front Gang Right to Cut Out (A) Left to Cut Out (B)

(A)

(B)

(A)

Cross Sectional View Of Soil Distrubance

Figure : 4.10 Adjustable Front Gang

Figure : 4.13 Adjustment Left.

Move Front Gang Right To Cut Out (A) Left To Cut Out (B)

4.74.7

Ops Manual Template

OPERATOR & SAFETY MANUAL

2142F op & safety manual.indb 7

20/10/2022 1:05:59 PM

Made with FlippingBook - Online Brochure Maker