K Line Ag 2142F Speedbuster Operator Safety Manual

Field Operation

USEFUL HINTS

• Cross working at 15 degrees off line gives better leveling and trash clearance. • Full ground disturbance starts at 63.5mm (2.5 inches). • Adjustment should be made to compensate for disc wear and concavity. TO IMPROVE WEED CONTROL AND FOR BETTER SOIL DISTURBANCE • Adjust lateral disc positioning. • Ensure machine is traveling in line. • Increase depth to cut. • Replace discs. BLOCKING IN EXCESSIVE TRASH • Lower rear discs gang to drive better in soil. • Adjust angle of lift soil deflector to allow greater flow.

• Try reducing speed slightly. CLOGGING IN WET SOILS • Raise working depth. • Raise front discs. • Give soil more time to dry out.

RAM STOP COMBINATIONS

NOTE- INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH

Figure : 4.16 Ram Stop Combinations.

4.94.9

2142F FOLDING SPEEDBUSTER

OPERATOR & SAFETY MANUAL

2142F op & safety manual.indb 9

20/10/2022 1:05:59 PM

Made with FlippingBook - Online Brochure Maker