FASTENERS 11 Rivets & Anchors
NUT SERTS — KNURLED LARGE FLANGE
POP ® Rivet Nuts are ideal where irregular holes are a problem. The large flange construction combined with the axial knurls on the body ensure a torque-resistant fit. • Large Flange Head • Knurls create high torque-out valves and resist spinning due to cross-threading or over tightening.
F
Completed Application
L
• Blind installation - no access to backside required. • Outer flange is nearly flush with surface when installed. • Open end
1
Material: Plating:
Type C-1010/C-1008 Steel
D
Yellow Zinc
INCH SIZES
Thread Size 8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 3/8-16
Grip Range .020-.080 .020-.130 .020-.130 .027-.165 .027-.165 .027-.165 .027-.165
Hole Size 17/64 19/64 19/64 25/64 25/64 17/32 17/32
Installation Tool*
‘D’
‘F’
‘L’
Part No.
943.5020 943.5030 943.5040 943.5050 943.5060 943.5070 943.5090
.265 .296 .296 .390 .390 .530 .530
.375 .400 .400 .500 .500 .670 .670
.460 .515 .515 .620 .620 .735 .735
A,B,E
A,B,C,E A,B,C,E A,B,C,E A,B,C,E
C C
METRIC SIZES
Thread Size M4 x .7 M5 x .80 M6 x 1.0 M8 x 1.25 M10 x 1.50
Grip Range
Hole Size
Installation Tool*
‘D’
‘F’
‘L’
Part No.
943.5110 943.5120 943.5130 943.5140 943.5150
.5mm - 2mm .5mm - 3.3mm .7mm - 4.2mm .7mm - 3.8mm .7mm - 1.50mm
6.75mm 7.6mm 10.0mm 13.5mm 13.50mm
6.73mm 7.55mm 9.90mm 13.45mm 13.45mm
9.91mm 10.10mm 12.7mm 17.0mm 18.8mm
10.67mm A,F 13.10mm A,B,D,F 15.75mm A,B,D,F 18.65mm D 21.60mm D
*See threaded insert tool section
THREAD REPAIR — THREADSERTS ®
Winzer Threadserts ® are designed to install threads into any thickness of stock, including metal, plastic, fiberglass, or any rigid material. Ideal for solid stock applications. • Blind installation - no access to backside required.
• Finished repair is nearly flush with surface. • Thread Sert ® kit available: Part No. 947.250 • Open end U.S. THREADS
Materials:
Aluminum and Steel
Completed Application
Thread Size
Hole Size .221 .250 .2812 .2812
Drill Hole ‘D’
Installation Tool*
Aluminum Part No.
Steel Part No.
‘A’
A
946.6.32 946.8.32 946.10.24 946.10.32 946.14.20 946.38.16
946.06.32 946.08.32 946.010.24 946.010.32 946.014.20 946.038.16
6-32 8-32 10-24 10-32
#2 1/4
.215 .246 .277 .277 .496 .559
.375 A,B,E .375 A,B,E .375 A,B,C,E .375 A,B,C,E .510 A,B,C,E
9/32 9/32 1/2 9/16
D
1/4-20 .3906 25/64 .372
946.516.18 946.0516.18
5/16-18 .500 3/8-16 .5625
.615 C .740 C
*See threaded insert tool section
THREAD INSERT SETTING TOOLS
THREADSETTER TOOL & COMPONENTS (FOR RN-1 TOOL)
Inch Sizes
Metric Sizes
Mandrels
Part No.
Mandrels
Part No.
947.1.632 947.632 947.1.832 947.832 947.1.1024 947.1.1032 947.1024 947.1420 947.1.1420 947.1.1428 947.1.51618 947.1.3816
Mandrel 6-32 Nose Piece 6-32 Mandrel 8-32 Nose Piece 8-32 Mandrel 10-24 Mandrel 10-32
947.1.4 947.4 947.1.5 947.5 947.1.6 947.6
Mandrel M4 Nose Piece M4 Mandrel M5 Nose Piece M5 Mandrel M6 Nose Piece M6
947.0700
(A)
• For Threadsert, Rivet Nut & Nut Sert installations (see tool application chart) • Pulls aluminum & steel inserts • Complete with 8-32, 10-24 and 10-32 mandrels and nosepieces • Other mandrels and nose pieces sold separately • Aluminum alloy body and drop forged steel upper handles • RN-1 Tool
* Nose piece not needed * Mandrel 3/8-16 Mandrel 1/4-20 * Mandrel 1/4-28 * Mandrel 5/16-18 Nose Piece 10-24/10-32 Nose Piece 1/4-20 & 1/4-28
THREADSERT COMPONENTS FOR DISCONTINUED MARSON TOOL (PART NO. 39200)
Inch Sizes
Metric Sizes
Mandrels
Part No.
Mandrels
Part No.
947.0701 947.0702 947.0703 947.0704 947.0705 947.0706 947.0707 947.0708 947.07081 947.00709 947.007010
Mandrel 6-32 Nose Piece 6-32 Mandrel 8-32 Nose Piece 8-32 Mandrel 10-24 Mandrel 10-32
947.0709 947.0710 947.0711 947.0712 947.0713 947.0715
Mandrel M4 Nose Piece M4 Mandrel M5 Nose Piece M5 *Mandrel M6 *Mandrel M10
* Nose piece not needed *Mandrel 3/8-16 Nose Piece 10-24/10-32 *Mandrel 1/4-20 *Mandrel 1/4-28 *Mandrel 5/16-18
Copyright © 2025 Winzer 800-527-4126
1-11-6
Made with FlippingBook - Online magazine maker