FASTENERS 11 Rivets & Anchors
ANCHORS — PLASTIC PLUGS
Diameter & Length
Screw Sizes #4 - #6 #7 - #9 #10 - #12 #10 - #12 #10 - #12 #10 - #12
Hole Size Color 3/16 White
Part No.
924.12.3110 924.12.1510 924.12.1410 924.12.1412 924.12.1414 924.12.1420 924.12.5610 924.12.5614 924.12.5620
3/16 x 1 15/64 x 1
1
Drill hole to full length of anchor and insert flush with surface. Put fixture in place, insert screw and tighten. The Fluted Plastic Anchor is a multi-size fastener for light duty applications in solid building materials. Use in: Concrete, Block, Brick, Stone Use with: Sheet metal or wood screw Made of: Ductile Plastic • Layout or hole spotting required • Acid-resistant • Screw length equals work thickness plus anchor length
15/64
Red
1/4 x 1
1/4 1/4 1/4 1/4
Green Green Green Green
1/4 x 1-1/4 1/4 x 1-1/2
1/4 x 2 5/16 x 1
#14 or 1/4” Lag #14 or 1/4” Lag #14 or 1/4” Lag #16 or 5/16” Lag #16 or 5/16” Lag
5/16 5/16 5/16
Blue Blue Blue
5/16 x 1-1/2
5/16 x 2
3/8 Orange 924.12.3814 3/8 Orange 924.12.3824
3/8 x 1-1/2 3/8 x 2-1/2
ANCHORS — PLASTIC CONICAL
• Layout or hole spotting required • Light duty • Has collar for hollow material • Screw length equals work thickness plus anchor length
Screw Size 4-6-8 6-8-10
Drill Dia. 3/16 3/16
Min. Depth
Size
Part No.
920.68.34 920.810.78 920.1012.1 920.1416.138
#6-8 x 3/4 #8-10 x 7/8 #10-12 x 1
3/4 7/8
Use in: Concrete, Block, Brick, Wallboard Use with: Sheet metal or wood screw Made of: Corrosion-resistant plastic
10-12
1/4
1
10-12-14
#14-16 x 1-1/2
5/16
1-1/2
*Screws sold separately, use prefix 115.0 *Note: Box and Drill not included, see complete kits below. a lightweight plastic anchor for wood and sheet metal screws. recommended for light duty static applications where holding power is not a critical factor.
Drill hole. Insert until flange is flush with surface of base material. Position fixture. Insert screw and tighten.
ANCHORS — PLASTIC CONICAL KITS
• Includes plastic box, plugs, screws and drill bit
Anchor Size #6-8 x 3/4 #8-10 x 7/8 #10-12 x 1 #10-12 x 1 #14-16 x 1/2
Drill Bit Included
Screws Included
Tapping Screw Type Combo/Pan Hd Combo/Pan Hd Combo/Pan Hd Combo/Pan Hd Combo/Pan Hd
Part No.
920.0.68.34 920.0.810.78 920.0.1012.1 920.0.10120.1 920.0.1416.138
3/16 x 4 3/16 x 4 1/4 x 4 1/4 x 4 5/16 x 4
#6 x 1 #8 x 1 #10 x 1 #12 x 1
#14 x 1-1/2
* Additional screws available separately under prefix 115.0
ANCHORS — PLASTIC CONICAL RIBBED
Screw Size Color
Drill Dia.
Min. Depth Part No.
Size
924.20.78 924.20.114 924.20.112
4-6-8 Yellow 4-6-8 x 7/8
3/16 7/8
• Barbed anchor for superior pull-out power • Size color-coded Use in: Concrete, wallboard and wood Use with: Sheet metal or wood screw Made of: Polyethylene
8-10-12 Blue 8-10-12 x 1-1/4 1/4 1-1/4
12-14-16 Green 12-14-16 x 1-1/2 5/16 1-1/2
ANCHORS — MUNGO PLUGS
Fastener Used
Size
Part No.
924.5.4 924.5.5 924.5.7.0 924.5.8 924.5.10 924.5.16
5/32 x 3/4 3/16 x 1 1/4 x 1-3/8 5/16 x 1-1/2
#6 #8
#12 or 1/4 Lag 1/4 or 5/16 Lag 5/16 or 3/8 Lag
Use in: Concrete, Block, Brick, Wallboard Use with: Sheet metal screws, wood screws, machine screws and lag screws Made of: Nylon • Drill hole 1/2” deeper than anchor
3/8 x 2
5/8 x 3-1/8
5/8 Lag
Copyright © 2025 Winzer 800-527-4126
1-11-8
Made with FlippingBook - Online magazine maker