FASTENERS 11 Rivets & Anchors
ANCHORS — TOGGLERS
Hole Size
Screw Size #10-24
Vendor Part No Part No
Size
Toggler Brand Toggle Bolts
924.010.316 924.010.14
3/16
1/2 1/2
25013 25014 21015
1
1/4 3/8
1/4-20 3/8-16
3/4 924.010.38 SNAPTOGGLE toggle bolts for Maximum strength & precise Alignment in:
• Hollow Brick • Cement Board • Drywall • Fiberglass
• Cinder Block • Hollow Brick • Plaster • Boat Docks
• Concrete Block • Stucco • Composite Panels • Paneling
ANCHORS — EZ TOGGLES
Description
Part No.
903.4
EZ Toggle w/ #8 2-1/8 Pan Head SMS
1. Place #2 Phillips screwdriver into recess of E-Z Toggle. Press into drywall while turning the anchor clockwise until it is seated flush with wall and arrows on head are parallel to stud. 2. Place fixture in position over installed E-Z Toggle. Insert screw and push through E-Z Toggle to engage clamp. 3. Continue turning screw until tight. The clamp will move back against the drywall as the screw is turned.
• Self-drilling into 3/8”, 1/2” and 5/8” wallboard • Maximum fixture thickness: 1/2” • Overall length: 2-1/2”
ANCHORS — TITEN TURBO
HEX HEAD
ANSI Drill Size
Hex Bit Size
D
L
Part No.
929.3.316.114 929.3.316.134 929.3.316.214 929.3.316.234 929.3.316.314 929.3.316.334 929.3.14.114 929.3.14.134 929.3.14.214 929.3.14.234 929.3.14.314 929.3.14.334 929.3.14.4 929.3.14.5 929.3.14.6
3/16 3/16 3/16 3/16 3/16 3/16
1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4
5/32 5/32 5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16
1/4 1/4 1/4 1/4 1/4 1/4
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4
5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16
• Torque Reduction Channel that traps dust where it can’t obstruct the thread action, reducing the likelihood of binding in the hole (patent pending) • Serrated screw point for easier starts when fastening wood • Availability with either a hex head or, for a smoother installed profile, a 6-lobe-drive countersunk head • Matched-tolerance bit not required; use a standard ANSI drillbit for installation • Designed for installation with an impact driver or cordless drill • Code listed in accordance with ICC-ES AC193 for concreteapplications without cleaning dust from predrilled holes (IAPMO UES ER-712) • Use in dry interior environments only
4 5 6
FLAT TORX
ANSI Drill Size
Torx Bit Size
D
L
Part No.
929.4.316.114 929.4.316.134 929.4.316.214 929.4.316.234 929.4.316.314 929.4.316.334 929.4.14.114 929.4.14.134 929.4.14.214 929.4.14.234 929.4.14.314 929.4.14.334 929.4.14.4
3/16 3/16 3/16 3/16 3/16 3/16
1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4
5/32 5/32 5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 3/16
T25 T25 T25 T25 T25 T25 T30 T30 T30 T30 T30 T30 T30
TITEN TURBO INSTALLATION KIT 929.1800
1/4 1/4 1/4 1/4 1/4 1/4 1/4
4
Copyright © 2025 Winzer 800-527-4126
1-11-12
Made with FlippingBook - Online magazine maker