FASTENERS Rivets & Anchors 11
ANCHORS — MACHINE SCREW
Screw Diameter
Anchor Diameter
Hole Depth
Setting Tool Part No.
1
Part No.
907.2.10.58 907.2.14.78 907.2.516.1
907.5.10 907.5.14 907.5.516
10-24
3/8
5/8
1/4-20
1/2
7/8
5/16-18
5/8
1
• Setting tool provided with each box/100 anchors • Provides quick setting in concrete, stone and brick • Anchor made of: zinc alloy cone and lead ring • GSA specification FF-325, Group 1, Type 1, Class 1
907.2.38.114 907.5.38
3/8-16
3/4
1
907.5.12
1/2-13
7/8
1-1/2
ANCHORS — EXPANSION SHIELDS
Single Expansion Machine Screw Anchors are a corrosion-resistant, die cast machine bolt anchor with a single, internal expanding cone for use in concrete, concrete block and brick. The Double Expansion Machine Screw Anchor utilizes the same basic anchor design but with double expansion cones to provide higher loads and better performance in base materials of questionable strength. Material: Die Cast Zamac 3 Alloy
SINGLE EXPANSION ANCHORS Screw Size Drill Bit Size
Embedment Depth
Part No.
927.0.14 927.0.516 927.0.38 927.0.12
1/4-20 5/16-18 3/8-16 1/2-13
1/2 5/8 5/8 7/8
1-3/8 1-5/8 1-5/8 2-1/2
DOUBLE EXPANSION ANCHORS Screw Size Drill Bit Size
Embedment Depth
Part No.
927.01.14 927.01.516 927.01.38 927.01.12
1/4-20 5/16-18 3/8-16 1/2-13
1/2 5/8 3/4 7/8
1-1/2 1-3/4 2-1/4 2-3/4
ANCHORS — LAG SHIELDS
Anchor Size
Hole Size
Length
Part No.
907.1.14.1
1/4 1/4
1
1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8
907.1.14.112 907.1.516.114 907.1.516.134 907.1.38.134 907.1.38.212
1-1/2 1-1/4 1-3/4 1-3/4 2-1/2
5/16 5/16
3/8 3/8 1/2 1/2 5/8
• Used for light to medium duty fastening • Can be used in concrete, mortar joint, masonry and brick • Lag screw must protrude at least a 1/4” out from the bottom of the anchor to insure proper expansion • Made of: high quality zinc alloy • Rustproof
907.1.12.2 907.1.12.3
2 3
907.1.58.312
3-1/2
Copyright © 2025 Winzer 800-527-4126
1-11-15
Made with FlippingBook - Online magazine maker