FASTENERS 12 Chain & Cable Hardware
EYE BOLTS — FORGED WITH NUTS PLAIN PATTERN
• Forged • 1030 Carbon Steel • Hot Dip Galvanized • Plain Pattern • Heavy Hex Nut Included
Working Load Limit In Pounds
Thread Length (C)
I.D. Eye (D)
O.D. Eye (E) 1.00 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.50 2.50 2.75 3.00 3.50 4.00 4.00
DIA (A) x SHANK (B)
Import Part No.
669.7.0142 669.7.0144 669.7.0145
1/4 x 2 1/4 x 4 1/4 x 5
650 650 650
1.50 2.50 2.62 1.50 2.50
.50 .50 .50 .63 .63 .63 .75 .75 .75 .75 .75
1
C
669.7.0516214 669.7.0516414 669.7.05166 669.7.038212 669.7.0383 669.7.038412 669.7.0386 669.7.0388 669.7.0122 669.7.012314 669.7.012412 669.7.0126 669.7.0128 669.7.01210 669.7.01212 669.7.0584
5/16 x 2-1/4 5/16 x 4-1/4
1200 1200 1200 1200 1500 1500 1500 1500 2600 2600 2600 2600 2600 2600 2600 5200 5200 7200 7200
A
D E
5/16 x 6
-
3/8 x 2-1/2
1.50
B
3/8 x 3
-
3/8 x 4-1/2
2.50 2.50 1.50 1.50 - 3.00 3.00 3.00 2.25 2.00 3.00 3.00 3.00 - 3.00 3.00 4.00
Working Load Limit applies to straight line pull only. These ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. When applying load at an angle the Working Load Limit is drastically reduced. Never insert the point of a hook in an eyebolt. Always use a shackle. CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
3/8 x 6 3/8 x 8 1/2 x 2
1.00 1.00 1.00 1.00 1.00 1.00 1.22 1.25 1.25 1.50 1.50 1.75 2.00 2.00
1/2 x 3-1/4 1/2 x 4-1/2
1/2 x 6 1/2 x 8 1/2 x 10 1/2 x 12 5/8 x 4 5/8 x 6 3/4 x 6 3/4 x 8 7/8 x 8
669.7.0586 669.7.0346 669.7.0348 669.7.0788 669.7.016 669.7.019
10600 10000 10000
1 x 6 1 x 9
EYE BOLTS — FORGED WITH SHOULDER PATTERN
• Forged • 1030 Carbon Steel • Self-Colored • Shoulder Pattern • Mfg. in Accordance with ANSI B18.15
Working Load Limit In Pounds
Thread Length (C)
I.D. Eye (D) 0.88 .625 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.50
O.D. Eye (E) 0.88 1.11 1.38 1.38 1.38 1.75 1.75 1.75 1.75 2.25 2.25 2.25 2.75 2.75 2.75
DIA (A) x Shank (B)
Import Part No.
669.4.14.4
1/4 x 4
650 650
2.50 1.50 1.50 2.50 3.00 1.50 1.50 2.50 4.00 2.00 3.00 4.00 2.00 3.00 4.00
669.4.516.214 669.4.38.212 669.4.38.412 669.4.38.6 669.4.12.2 669.4.12.314 669.4.12.412
5/16 x 2-1/4 3/8 x 2-1/2 3/8 x 4-1/2
C
1550 1550 1550 2600 2600 2600 2600 5200 5200 5200 7200 7200 7200
A
D E
3/8 x 6 1/2 x 2
B
1/2 x 3-1/4 1/2 x 4-1/2
Working Load Limit applies to straight line pull only. These ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. When applying load at an angle the Working Load Limit is drastically reduced. Never insert the point of a hook in an eyebolt. Always use a shackle. CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
669.4.12.8 669.4.58.4 669.4.58.6 669.4.58.8
1/2 x 8 5/8 x 4 5/8 x 6 5/8 x 8
669.4.34.412
3/4 x 4-1/2
669.4.34.6 669.4.34.8
3/4 x 6 3/4 x 8
EYE BOLTS — MACHINERY USA
• Forged Carbon Steel • ASTM A489 fully threaded • Self Colored
DIA (A) x Thread Length (C) 5/16 x 1-1/8 3/8 x 1-1/4 7/16 x 1-3/8 1/2 x 1-1/2 1/4 x 1
Working Load Limit In Pounds
Eye I.D. (D)
Eye O.D. (E) 1-3/16 1-7/16 1-21/32 1-27/32 2-1/16 2-1/2 2-13/16
USA Part No.
669.4.14 669.4.516 669.4.38 669.4.716 669.4.12 669.4.58 669.4.34 669.4.78 669.4.1
500 900
.69 .81 .94
C
1400 2000 2600 4000 6000 7000 9000
D E
A
1.00 1.12 1.31 1.44 1.56 1.69
5/8 x 1-3/4
3/4 x 2
7/8 x 2-1/4 1 x 2-1/2
3-1/4
3-9/16
Copyright © 2025 Winzer 800-527-4126
1-12-2
Made with FlippingBook - Online magazine maker