FASTENERS 12 Chain & Cable Hardware
YOKE ENDS — ADJUSTABLE
H
D
T
• Forged • Steel
Overall Length from Center of Eye (A)
Length of Yoke from
O.D. of Tapped End (B)
Yoke Inside Width (E)
Yoke Outside Width (F)
Length of Tapped End (H)
O.D. of Eye (K)
• Self-Colored • Made in USA
B
E F
ID of Eye (G)
Thread (T)
Center of Eye (D)
Part No.
1
G
K
669.17.14
1/4-28
2
7/16
1-1/4 9/32 5/8 1/4
3/4
1/2
A
1-7/16 11/32 3/4 5/16 13/16 19/32 669.17.516
5/16-24 2-1/4 3/8-24 2-1/2
1/2 5/8
11/16 669.17.38 13/16 669.17.716
1-5/8 7/16 7/8 3/8
7/8
7/16-20 2-7/8 23/32
1-7/8
1/2
1
7/16
1
1/2-20 1-7/8 9/16 1-1/8 1/2 1-1/8 15/16 669.17.12 5/8-18 4-15/16 1-1/16 3-11/16 11/16 1-3/8 5/8 1-1/4 1-3/16 669.17.58 3 13/16
LINKS — COLD SHUTS
• Zinc-Plated • Use one size larger than chain diameter • Do not used for overhead lifting • Only to be used with proof coil chain overhead lifting
Working Load Limit In Pounds
Import Part No.
Size
669.16.316 669.16.14 669.16.516 669.16.38 669.16.12
3/16
450 750
1/4
5/16
1250 1900 3500
3/8 1/2
Caution: Only to be used with proof coil chain. Never exceed the working load limited
LINKS — TWIN CLEVIS
A E
G
D
• Grade 43 • Forged Steel • Heat Treated • Plated • Not to be used for overhead lifting
Size A B C D E F G H Working Load Limit in Tons Part No. 1/4-5/16 0.47 2.50 1.56 0.38 1.31 0.43 0.94 0.50 4700 669.12.14516 3/8 0.53 2.81 1.81 0.44 1.53 0.50 1.00 0.56 6600 669.12.38 7/16-1/2 0.65 3.62 2.31 0.56 1.91 0.63 1.31 0.81 11300 669.12.71612
F
C
B
H
LINKS — DOUBLE CLEVIS
• Grade 70 • Forged Steel • Heat Treated • Zinc Plated • Not to be used for overhead lifting
Working Load Limit in Tons
Size
Small End Large End
Part No.
669.122.14 669.122.51638 669.122.716 669.122.12
1/4
2600 5400 7000 9200
0.50 0.56 0.69 0.81
0.75 1.00 1.13 1.25
5/16-3/8
7/16
1/2
LINKS — TWO PIECE CONNECTING
• Forged — Heat Treated • Zinc Plated • Grade 30 • Not to be used for overhead lifting or load securement
D
Working Load Limit in Pounds
(A) Inches
(B) Inches
(C) Inches
(D) Inches
Size
Part No.
C
669.14.316 669.14.14 669.14.516 669.14.38 669.14.12
3/16
800
0.78 1.00 1.16 1.38 1.72
1.19 1.50 1.69 2.06 2.66
0.34 0.44 0.47 0.56 0.66
0.69 0.88 0.94 1.13 1.47
1/4
1325 1950 2750 4750
A
5/16
B
3/8 1/2
LINKS — REPAIR / LAP
• Zinc/eletro galvanized • Not to be used for overhead lifting or load securement
Working Load Limit in Pounds
Import Part No.
Size
669.15.316 669.15.14 669.15.516 669.15.38 669.15.12
3/16 x 1 1/4 x 1-1/4 5/16 x 1-1/2 3/8 x 1-5/8
240 400 900 1250 2125
3/8 x 2
Copyright © 2025 Winzer 800-527-4126
1-12-4
Made with FlippingBook - Online magazine maker