FASTENERS 12 Chain & Cable Hardware
WIRE ROPE CLIPS — MALLEABLE
• 1030 Carbon Steel • Zinc Plated or Galvanized • All Regular Hex Nuts
Inside Length of U-Bolt (B)
Min. No. of Clips for Max. Strength
USA Galvanized Part No.
Import Zinc Plated Part No.
Size for Rope Dia.
B
1
669.10.18 669.10.316 669.10.14 669.10.516 669.10.38 669.10.716 669.10.12 669.10.58 669.10.34 669.10.78
669.10.018 669.10.0316 669.10.014 669.10.0516 669.10.038 669.10.012 669.10.058 669.10.034 669.10.078
1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8
23/32 1-5/16 1-1/32 1-5/16 1-1/2 1-7/8 1-7/8 2-3/8 2-3/4 3-1/8 3-1/2
2-4 2-4 2-4 2-4 2-4 3-4 3-4 3-4 4-5 4-5 4-5
3/4 7/8
1 669.10.1 Malleable rope clamps are to be used for light duty, non-critical applications. The correct way to attach U-bolts is shown above: The “U” section is in contact with the ropes’ “dead end” and is clear of the thimble. The “live end”, carrying the load, is gripped by the saddle of the clamp. DO NOT USE malleable wire rope clamps for critical or lifting applications…Load may be suddenly released resulting in injury or death. Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope. Not designed for overhead lifting
WIRE ROPE CLIPS — FORGED
• 1030 Carbon Steel • Hot Dip Galvanized
Inside Length of U-Bolt
Min. No. of Clips for Max. Strength
Size for Rope Dia.
USA Part No.
Import Part No.
669.11.18 669.11.316 669.11.14 669.11.516 669.11.38 669.11.12 669.11.58 669.11.34 669.11.78 669.11.1
669.11.018 669.11.0316 669.11.014 669.11.0516 669.11.038 669.11.012 669.11.058 669.11.034 669.11.078 669.11.01
1/8 3/16 1/4 5/16
3/4
2 2 2 2 2 3 3 4 4 5
31/32 1-7/32 1-5/8 1-5/8 1-29/32 2-3/8 2-13/16 3-1/8 3-1/2
3/8 1/2 5/8 3/4 7/8
1
The correct way to attach U-bolts is shown above: The “U” section is in contact with the ropes’ “dead end” and is clear of the thimble. The “live end”, carrying the load, is gripped by the saddle of the clamp. DO NOT USE malleable wire rope clamps for critical or lifting applications…Load may be suddenly released resulting in injury or death. Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope. Not designed for overhead lifting
WIRE ROPE THIMBLES
• Material: Steel, Galvanized • Standard duty • Match thimble size to cable diameter
Size
Part No.
Size
Part No.
669.23.18 669.23.316 669.23.14 669.23.516
669.23.38 669.23.12 669.23.58
1/8
3/8 1/2 5/8
3/16
1/4
5/16
SWAGE FITTINGS
Uncoated Cable
Uncoated Cable
Aluminum Sleeves Part No.
Aluminum Stops Part No.
ZP Copper Sleeves Part No.
Aluminum Sleeves Part No.
Aluminum Stops Part No.
ZP Copper Sleeves Part No.
Size Inch 1/16 3/32
Size Inch 5/32 3/16
669.24.116 669.25.116 669.241.116 669.24.332 669.25.332 669.241.332 669.24.18 669.25.18 669.241.18
669.24.532 669.25.532 669.24.316 669.25.316 669.24.14 669.25.14
1/8
1/4
669.24.516
669.24.516
5/16
5/16
Sleeve
Stop
• Material: Aluminum or ZP Copper • Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable • Stops are capable of holding one-third to one-half of the rated breaking strength of the cable
TOOLS — SWAGING / CABLE CUTTER
• Jaws are made of forged Alloy steel with heat treatment • Hand swaggers are designed for crimping copper and aluminum ovals and stops
24” SWAGING TOOL 669.24.01 1/16, 3/32, 1/8, 5/32, 3/16
30” SWAGING TOOL 669.24.02 5/32, 1/4, 5/16
Copyright © 2025 Winzer 800-527-4126
1-12-8
Made with FlippingBook - Online magazine maker