ELECTRICAL 1 Terminals
TERMINALS — NYLON INSULATED (continued)
Y E
L L O W 10-12 GA.
559.90.123
559.90.124
559.60.1210 #10
559.41.1208 #8
559.41.1210 #10
559.60.1206 #6
559.60.1208 #8
553.41.1210 #10
TERMINALS — LARGE GAUGE - NYLON
2
2
1
1. Nylon & annealed for free flow under crimping pressure. Electroplated tin coated for corrosion resistance. Meets UL, CSA, and MIL-T-10727 requirements. 2. Wire range is stamped on the metal surfaces.
8
Color Code Red #8 Blue #6 Yellow #4
3
3. Serrated barrel or dimples for improved gripping power. 4. Funnel Entry-Vinyl Insulation is molded to guide wire 5. Flex Protection-The PVC insulation overhang reduces potential damage due to wire flex and vibration
7
4
5
6
Y E L L O W #4 GA.
B L U E #6 GA.
R E D #8 GA.
567.10.810 #10
567.10.814 1/4”
567.10.838 3/8”
567.10.812 1/2”
567.10.614 1/4”
567.10.616 5/16”
567.10.638 3/8”
567.10.414 1/4”
567.10.456 5/16”
567.10.438 3/8”
TERMINALS — HEAT SEAL CRIMP
A. Heat activated, color-coded nylon insulation shrinks around wire to seal out moisture and provide extra pull-out strength to the connection. B. Tin plated copper construction provides maximum conductivity and corrosion resistance. C. Funnel entry of insulation jacket makes wire insertion fast and easy. D. Hot-melt adhesive inner liner seals the connection against moisture, water, salt, and other corrosive compounds. E. Seamless inner barrel ensures consistent contact regardless of the location of crimp.
Color Code
Red Blue
18-22 14-16 10-12
A
Yellow
E
Simple Installation Steps: 1. Select the correct splice size for the wire gauge. Strip the wires 0.3” (7.5mm) from the end and insert into the crimp. 2. Making sure the wire end is properly seated, make the crimp connection using a tool designed for insulation splices. 3. Apply heat directly to the splice, working from the center out to the edges, using a hot air gun or other heat source, until the tubing recovers and the adhesive flows. Allow to cool before inspecting splice and checking integrity.
B
D
B
R E D 18-22 GA.
549.50.2400 24-22 ga. Butt Connector
549.50.2200 22-18 ga. Butt Connector
549.70.22 Fully Insulated 1/4” Female (mate: 549.80.22)
549.30.2214 1/4” Male
549.50.22 22-18 ga. Butt Connector (Perma-Seal)
549.20.2214 1/4” Female
549.80.22 Fully Insulated 1/4” Male (mate: 549.70.22)
549.42.2206 #6
549.42.2208 #8
549.42.2210 #10
White
R E D 18-22 GA.
549.10.2214 1/4”
549.10.2238 3/8”
549.40.2206 #6
549.40.2208 #8
549.10.2206 #6
549.10.2208 #8
549.81.22 .157 Male
549.10.2210 #10
549.40.2210 #10
549.71.22 .157 Female
Copyright © 2025 Winzer 800-527-4126
2-1-4
Made with FlippingBook - Online magazine maker