ELECTRICAL 2 Fuses & Flashers
FUSES — FUSE HOLDERS (continued)
Waterproof Solderless Fuse Holder 729.4604 • For use in dusty or damp locations • 32 Volt, 30 Amp Maximum • Accepts 18 thru 12 Awg Wire • Use with 1/4” diameter by 1-1/4” long round fuses
Solderless Fuse Holder 729.4600
• 32 Volt, 30 Amp Maximum • Accepts 18 thru 12 Awg Wire • Use with 1/4” diameter round fuses — 7/8”, 1” or 1-1/4” long
Installation 1. Strip insulation from wire. 2. Insert wire in holder. 3. Crimp terminal through body. 4. Repeat steps 1-3 for other half of holder. 5. Insert fuse. 6. Snap housings together.
Installation 1. Thread wire through housing. 2. Strip insulation per strip gauge. 3. Crimp fuse clip to wire. 4. Pull wire and seat fuse clip in housing. 5. Insert fuse. 6. Snap housings together.
Proper Fuse Clip Alignment
Crimp Tool
Step 1
Seam
Step 2
2
Fuse Clip
Step 3
Fuse Panel for ATC fuses
Blade-Type Part No. 4 Position 731.5604 6 Position 731.5606 10 Position 731.5610
• A single, common power input makes it simple to wire for multiple circuits • Rated to 30 amps, up to 32 volts • Quick-connect terminals for easy installations
729.0060 ATO/ATC fuse holder with cover 3-20 amps #16 ga. lead wire
729.0061 ATO/ATC heavy duty fuse holder with cover 3-30 amps #12 ga. lead wire
729.150 MINI™ fuse holder with cover 2-20 amps #16 ga. lead wire
729.155 MINI™ heavy duty fuse holder with cover 2-30 amps #12 ga. lead wire
729.160 ATO/ATC fuse holder with LED indicator 3-20 amps #16 ga. lead wire
729.163 MINI/ATM fuse holder with LED indicator 3-20 amps #16 ga. lead wire
725.0112 MAXI™ fuse holder with cover 20-60 amps #6 ga. lead wire
729.166 Glass Tube In-line Fuse Holder 32 Volt 30 Amp with 12 gauge lead wires
729.165 Yellow Fuse Holder 32 Volt 20 Amp 2 - 4 inch 16 Gauge lead wires
729.145 Micro fuse holder with cover 32 volt 15 AMP with 2 - 4 lead wires, #16
729.164 ATC Fuse Holder
32 Volt 30 Amp with 2 - 4 inch 12 gauge lead wires
FUSES — TAPS & PULLERS
Minifuse Tap Adapter
Minitaper
ATO Blade Fuse Tap
553.1481 1/4” male
553.1483 • Slips over leg of minifuse • Tap size .187
• Plugs into empty fuse cavity • Tap size .187 553.1482
Non-feed through stud-type junction block 3/8-16 x 7/8” thread/stud size, 250 amps max
729.0073 Fuse puller allows for easy fuse removal and replacement of the Mcase series fuses
729.0070 Fuse puller for ATO, Mini, Glass, and Ceramic fuses.
729.0071 ATO/ATC and mini fuse puller and tester
Bussman No.
Poles Stud thread Part No. 1 3/8-16 BP/JB3816-2 Stud Junction Block 731.38162 Type
Copyright © 2025 Winzer 800-527-4126
2-2-8
Made with FlippingBook - Online magazine maker