FASTENERS Inch Bolts & Screws 1
TOOLS — CALIPERS & GAUGES
QUICK CHECK SCREW GAUGE 690.9961 • Quick way to identify machine screws, bolts, wood screws, standard size rivets, and common cotter pin sizes up to 5/16” (8mm) • 3” scale to check screw lengths • Checker gives required drill size for recommended tap size and proper drill size for like hole • Threaded holes indicate threads per inch while unthreaded holes indicate size by number and fractions of an inch • Durable engineering plastic
DIGITAL CALIPER 6” 690.9990 • Measuring range: 0-6” (0-150mm) • Resolution: 0.0005” (0.01mm) • Accuracy: 0.001” • LCD display • Power: 1.55v silver oxide battery (SR44) • Working temperature: 41°F - 104°F (5°C - 40°C) • Humidity: keep under 80% humidity
1
— Standard Inch • Graduation: 10, 11, 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40 • Pitch Range: 10 TPI - 40 TPI 690.998 THREAD GAUGES
BOLT AND NUT GAUGE 980.2270 • Inch and Metric • Made of Heavy Plastic • Thread Pitch Gauge • 8-1/4” x 3-1/4”
— Metric • Graduation: 1.0, 1.25, 1.5, 1.75, 27, 28, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9 • Pitch Range: 0.5mm -1.75mm, 2.7, 28 • Pipe thread pitch in each 690.999
— Metric — American Std. 980.01.5224 980.01.1421 • Identify thread pitch with a full set of common pitch gauges • Measure bolt size in metric or american standard • Includes clearly marked bolt grade guide • Rust free high-grade stainless steel TRI-GAUGE COMBO TOOL
LARGE DIAMETER BOLT GAUGE 690.99612 • The Large Diameter Bolt Gauge is used for: Sizing large diameter nuts, bolts, studs & washers • Metric and inch dimensions • Size washers from 3/4” to 3-1/4” & 20mm to 80mm • Size studs & bolts from 3/4” to 2” & 20mm to 50mm • On the reverse side you can size UNF & UNC nuts from 3/4” to 3” • Also on the reverse side you have a head id chart
for inch & metric head markings • Very useful and durable tool.
WALL MOUNTED CHECK-A-THREAD 980.2300
RIVETS GAUGE 930.1 • Quick way to identify size and rivets • 5-3/8” x 3-3/8” • .166 thick
JUMBO FRACTIONAL / METRIC THREAD IDENTIFIER 980.22712 • Inch Sizes: 5/8”-11, 5/8”-18, 3/4”-10, 3/4”-16, 1”-8, 1”-12 • Metric Sizes: M14 x 1.5, • Includes an extra-long wire rope for hard-to-reach places, and loops convenient for hanging. All thread identifiers are color coded with shatter-proof gauge dividers to allow for a • quick and easy recognition between inch, metric and pipe thread strands at a glance. • Check most common size nuts and bolts in one easy-to-display center. • Inch Sizes: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, • 1/2-20; 9/16-12, 9/16-18 • Metric Sizes: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75 • Pre-drilled for easy mounting • Mounted On Heavy-duty 1/2 Inch Sintra® board. • Overall dimension 3” x 39”
THREAD IDENTIFIERS
• All thread identifiers are equipped with a 3-3/8” (85mm) ruler. They have permanent, easy-to-read laser etched size markings that will not peel off and are chemical resistant.
FRACTIONAL / METRIC THREAD IDENTIFIER 980.2271 • Inch Sizes: 6-32, 8-32, 10-24, 10-32, 1/4”-20,
1/4”-28, 5/16”-18, 5/16”-24, 3/8”-16, 3/8”-24, 7/16”-14, 7/16”-20, 1/2”-13, 1/2”-20 M5 x 0.8, M6 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.0, M101.25, M10 x 1.50, M12 x 1.25, M12 x 1.75
• Metric Sizes: M4 x 0.7,
M14 x 2.0, M16 x 1.5, M16 x 2.0, M20 x 1.5, M20 x 2.5, M24 x 2.0, M24 x 3.0
Copyright © 2025 Winzer 800-527-4126
1-1-3
Made with FlippingBook - Online magazine maker