ELECTRICAL 8 Battery Cable
BATTERY — SOLDER SLUGS
510.9808 Flux for Solder Slugs
SOLDER SLUGS
• Pre-measured piece of solder that has been sized to provide the correct amount of solder for each size of cable connector. • Available in seven sizes, 4 gauge to 4/0 gauge • Color coded to coincide with industry coding • A simple and cost efficient way to achieve a perfect termination with no crimper to buy.
510.9807
Size
Color
Part No.
2
2
Place the proper size solder slug into the terminal. Secure the battery terminal in vise. Slide the proper size heat shrinkable tubing over the cable. Apply several drops of FLUX to the exposed cable. Insert the exposed cable into the terminal.
1
EASY TO USE: Strip the Proper size cable so that the exposed cable will reach all the way to the bottom of the battery terminal (not included) and the cable insulation fits snugly against the top.
510.9800 510.9801 510.9802 510.9803 510.9804 510.9805 510.9806 510.9807
6 Gauge 4 Gauge 2 Gauge 1 Gauge
Gray Gray
Green
Pink
1/0 Gauge
Black
2/0 Gauge Orange
3/0 Gauge 4/0 Gauge
Purple Yellow
4
Heat the base of thebattery terminal while applying gentle downward pressure on the cable. Allow the cable to slide into the terminal until the insulation is snug against the top of the terminal. Remove the heat. Caution: Do not apply heat near the car battery. Use only in a well ventilated area. 3
Slide the heat shrinkable tubing over the connection. Apply indirect heat to the tubing.
Allow the connection to cool. You now have “The Perfect Connection.”
BATTERY — CABLE
6 ga.
2 ga.
1/0 ga.
3/0 ga.
4/0 ga.
4 ga.
1 ga.
2/0 ga.
Size
6 ga.
4 ga.
2 ga.
1 ga.
1/0 ga. 2/0 ga. 3/0 ga. 4/0 ga.
Nominal O.D.
0.300 0.360 0.410 0.460 0.550 0.605 0.695 0.706
Roll Length Part No.
Roll Length Part No.
Gauge Color
Gauge Color
772.306 772.3061 772.3060 772.30610 772.304 772.3041 772.3040 772.30410 772.302 772.3021 772.3020 772.30210 772.301
772.3011 772.3010 772.30110 772.310 772.3101 772.31010 772.320 772.3201 772.3200 772.32010 772.330 772.340
6 Ga. 6 Ga. 6 Ga. 6 Ga. 4 Ga. 4 Ga. 4 Ga. 4 Ga. 2 Ga. 2 Ga. 2 Ga. 2 Ga. 1 Ga.
Black Red Black Red Black Red Black Red Black Red Black Red Black
25’ 25’
1 Ga. 1 Ga. 1 Ga.
Red Black Red Black Red Red Black Red Black Red Black Black
25’ 100’ 100’ 25’ 25’ 100’ 25’ 25’ 100’ 100’ 25’ 25’
100’ 100’ 25’ 25’ 100’ 100’ 25’ 25’ 100’ 100’ 25’
1/0 Ga. 1/0 Ga. 1/0 Ga. 2/0 Ga. 2/0 Ga. 2/0 Ga. 2/0 Ga. 3/0 Ga. 4/0Ga.
Battery and Starter Cable • Bare stranded solid copper conductors • Flexible PVC insulation resists fuel, oil, acid, and salt • Flame-retardant Note: When not using exactly the same gauge as the original, always use a heavier cable, never lighter.
*Welding cable also available, Listed in the Shop Supplies - Welding Section.
BATTERY TERMINALS — ASIAN STYLE
510.800 Quick Dis-connect Battery Terminal Top Neg.
510.806 Asian Style Lead Free Battery Terminal 6-4 Ga. Neg.
510.807 Asian Style Lead Free Battery Terminal 6-4 Ga. Pos.
510.812 Asian Style Lead Free Battery Terminal 1-2 Ga. Neg.
510.813 Asian Style Lead Free Battery Terminal 1-2 Ga. Pos.
510.814 Universal Asian Style Battery Terminal 5/16” stud size (Comes with 2 5/16” Lugs)
Copyright © 2025 Winzer 800-527-4126
2-8-2
Made with FlippingBook - Online magazine maker