CHEMICALS 3 Sealants & Adhesives
ADHESIVES — SPRAY TRIM (continued)
3M GENERAL TRIM ADHESIVE — CLEAR (Not for Sale or Use in California)
Container Size 18.1 oz Aerosol
3M Part No. 08088*
Part No.
822.08080
• Rapid-drying, high-strength, clear adhesive in an aerosol container • Designed for bonding most types of material used in automotive trim operations except unsupported vinyl • Excellent for fabrics, upholstery, foam, jute pads, carpets, rebonding vinyl top sections, etc
• Adjustable spray pattern, high initial strength and does not require shaking or agitation before using • Provides good heat & water resistance
*Note: 3M has reformulated its General Trim Adhesive and given it a new part number, # 08088. The previous formula, # 08080, has been discontinued.
3
3M SUPER TRIM ADHESIVE — YELLOW (Not for Sale or Use in California)
Container Size 19 oz Aerosol
3M Part No.
Part No.
822.08090
08090
• 3M Super Trim Adhesive is a fast-acting, high-strength, aerosol contact adhesive designed for two-surface application. • Resistant to heat & plasticizing oils and is excellent for attaching vinyl tops, headliners, vinyl trim, insulation, foam padding & rubber parts to metal & other surfaces
• Bonds can be made within minutes of application or as long as one hour later
ADHESIVES — EPOXIES
PME4450 FAST CURE EPOXY MIXER CUPS
Net Contents
Part No.
889.4574452
1.2 fl oz (10 each .12 oz epoxy mixer cups)
• 2-part epoxy • PME4450 hardens in five minutes
• Pre-measured cups ensure consistent performance since resin and hardener are always properly measured • Fill porosities and voids • Build up surfaces that have been worn • When fully cured, may be machined or sanded
• Bonds almost anything: nameplates to equipment, handles to levers, insulation to hood covers, broken plastic and ceramics, metal, glass, wood, stone • Chemical resistant to petroleum-based solvents, synthetic oils, weak acids, weak bases, water and high humidity
LOCTITE FIXMASTER ® FAST CURE EPOXY MIXER CUPS
Industrial Size Cups
Net Contents
Part No.
889.4574451
10 fl oz (10 each 1 oz epoxy mixer cups)
• Bonds almost anything: Loose trim, broken grilles, loose door glass channels, broken plastic and ceramics, metal, glass, wood, stone • Useful in casting cracks and holes • Fills porosities and can be used to build up worn parts • Can be machined or sanded once fully cured
• 2-part epoxy mixer cups – large size • Pre-measured cup contains 1 oz. of epoxy • Bonds parts in 5 to 15 minutes • Chemical resistant to petroleum-based solvents, synthetic oils, weak acids, weak bases, water and high humidity
Copyright © 2025 Winzer 800-527-4126
3-3-4
Made with FlippingBook - Online magazine maker