CHEMICALS Sealants & Adhesives 3
ADHESIVES — EPOXIES (continued)
LOCTITE 3092 INSTANT ADHESIVE Part No.
Net Weight 0.35 oz
Loctite
889.4503
3092
• 2-component technology – controlled, fast cure • Gap-fill ability – up to 2 mm
• Excellent bonding characteristics on a variety of substrates – PVC, ABS, PC, PBT, wood, paper, leather • Does NOT bond PE, PP, and PTFE
• Gel product – non-drip formula that stays where you put it • Syringe package – provides for a controlled mix ratio
3
PERMATEX ® PERMAPOXY TWO-PART EPOXY SYRINGES
Package
Set Time Strength 5 Min 3400 PSI 30 Min 3500 PSI
Temperature Range -60°F to 180°F -60°F to 180°F -60°F to 300°F -60°F to 300°F -60°F to 250°F
Permatex Part No.
Part No.
Description General Purpose
Type Color Syringe Clear Syringe Clear
889.50050 889.50054 889.50055 889.50056 889.50059
84101 84107 84109 84209 84115
Extra Strength, Crystal Clear
Multi-Metal Multi-Metal Plastic Weld
Syringe Grey 4 Min 4500 PSI Tubes Grey 4 Min 4500 PSI Syringe Tan 5 Min 3500 PSI
• Extra Strength, Crystal Clear: Used to bond or repair ceramic, concrete, fabric, glass, metal, rubber • Multi-Metal: Used to bond or repair aluminum, brass, chrome, copper, iron, stainless steel and steel • Plastic Weld: Used to bond or repair ABS, acrylic, fiberglass, glass, PVC, steel, styrene, vinyl and wood
• Easy-to-use, multi-purpose, two-part adhesives in .84 fl. oz. dual syringes or two, .6 oz. squeeze tubes • Used to bond or repair almost any material • Resistant to fuels, solvents and most other liquids • After fully curing, epoxy can be drilled, sanded, threaded or filed • Usable strength at 4 hours (72°F), fully cured at 24 hours • General Purpose: Used to bond or repair ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber
PERMATEX ® LIQUID STEEL FILLER Part No.
Permatex Part No.
Net Contents 3.5 oz Tube
889.1468
25909
• Works on metal, wood, and concrete • Can be drilled, filed, sanded, and painted • Excellent adhesion to galvanized metal • Repairs cracks or porosity leaks in cast metal parts • Fills small holes, cracks, and perforations
• Resists water, oil, and gasoline • Drying time is 3-4 hours, Full cure within 24 hours • Applications: oil pans, stake bed holes, door panels, cast metal parts
PERMATEX ® COLD WELD BONDING EPOXY 2 PART EPOXY TUBES
Net Weight
Permatex Part No.
Part No.
889.14600
2.0 oz (56 g)
14600
• High strength and fast curing; can be drilled, tapped, filed, machined, sanded, cut, painted • Chemical-resistant against water, diesel fuel, gasoline, antifreeze, motor oil, hydraulic fluid and transmission fluids • Set time = 4-6 minutes; handling strength = 15 minutes; Full cure = 16 hours
• Temperature-resistant to 250°F (continuous), 300°F (intermittent) • Applications: bonds aluminum, iron, steel, wood, glass, masonry, ceramic and most plastics. Clean and scuff surface for optimal adhesion.
Copyright © 2025 Winzer 800-527-4126
3-3-5
Made with FlippingBook - Online magazine maker