CHEMICALS 3 Sealants & Adhesives
ADHESIVES — THREADLOCKERS & RETAINERS
MEDIUM STRENGTH BTL2420 BLUE THREADLOCKER
Net Contents
Part No.
889.2410
1.69 fl oz (50ml)
MEDIUM STRENGTH: Removable general purpose adhesive, for locking/sealing fasteners over 1/4” in diameter. May be disassembled with hand tools. Meets MIL-A-46050C Type II, Grade N • Temperature Range: -60 to 300°F • Applications: Locks and seals threaded fasteners on brake lines, starter mounts, cab hardware, intake manifolds, water pumps, thermostat housings, fan drives, throttle linkages, flywheel housings,
alternators and compressor brackets, filter housings and brackets, ring and pinion bolts and pulleys. Retains and seals lip seats. • Cure Time: Fixture: 10-20 min. Working: 2 hrs Full Cure: 24 hrs
3
HIGH STRENGTH RTL2710 RED THREADLOCKER
Net Contents
Part No.
889.2415
1.69 fl oz (50ml)
• Cure Time: • Fixture: 15-25 min. • Working: 2 hrs • Full Cure: 24 hrs
HIGH STRENGTH: Permanent, for locking/sealing fasteners up to 1” in diameter. Disassembly difficult. Meets MIL-A-46050C Type II, Grade K. • Temperature Range: -60 to 300°F • Applications: For large fasteners, heavy duty parts. Seals against air, oil, and hydraulic leaks
DYNATEX GEL THREADLOCKERS Part No. Description
Size 35mL 35mL
889.49447 889.49457
Blue Medium Strength Gel Red Super High Strength Gel
• Dynatex Blue Medium Strength Threadlocker Gel is a medium strength anaerobic thread locking compound. • It is designed for locking threaded fasteners that require disassembly with standard hand tools. • It is a high viscosity, gel threadlocker specifically designed to not flow or drip off parts during application.
• The product performs on aluminum, steel, plated parts, stainless steel, and special alloy parts. • It exhibits good temperature and is solvent resistant. • Locks and seals fasteners and set screws. • Use in applications where shock and vibration may cause the fastener to loosen • Easy to use self-metering pump
DYNATEX THREADLOCKERS Part No. Color
Net Contents .20 fl oz (6 ml) .20 fl oz (6 ml)
Grade
889.2910 889.2911
Red Boltlocker Blue Boltlocker
High Strength
Medium Strength
Technical Data Red: Fills gaps up to .008 inches; for application before assembly; very strong, difficult-to-break bond; high heat of at least 400 ° F usually required to break bond Blue: Fills gaps up to .006 inches; for application before assembly; bond can be broken with normal hand tools Green (Boltlocker): Fills gaps up to .005 inches; wicking formulation migrates into preassembled threaded parts after adjustments are complete; for application after assembly; bond can be broken with normal hand tools Green (Sleevelocker): Fills gaps up to .006 inches; for application before assembly; retains sleeves; eliminates press and slip fits; replaces splines and keys; returns worn out-of-tolerance assemblies to fit; bond can be broken with normal hand tools
• Anaerobic threadlocking compounds • Locks and seals metal assemblies in the absence of air • Various strengths for different applications • Provides gap filling and fixturing in minutes • Seals against loosening and leakage due to vibration • Resistant To: oil, transmission fluid, glycol/water solutions and mild acids • Temperature Range: -65°F to 350°F • Applications: nuts, bolts, studs, press fits, slip fits, screws, bushings, sleeves, shafts, bearings, other fasteners and metal assemblies • Note: Not recommended on plastics.
Copyright © 2026 Winzer 800-527-4126
3-3-10
Made with FlippingBook - Online magazine maker