CHEMICALS 3 Sealants & Adhesives
ADHESIVES — ANCHORS
ULTRABOND ANCHORING EPOXY
Part No. 907.02201 907.02091 907.02202 907.02210 907.06004
Description
Size
A22 Ultrabond 1 Epoxy A9 Ultrabond 1 Epoxy A22 Ultrabond 2 Epoxy
21.2 oz Cartridge 9 oz Cartridge 21.2 oz Cartridge
907.02210
Ultrabond Dispenser Gun TM22HD Use with A22 Epoxy 21.2 oz.
Ultrabond NozzleT3412CT Dual 3/4” and 1/2” Nozzles • Ultrabond 1™ is a “fast-cure” formula specifically developed for projects requiring “fast bolt-up” and extended working time in a variety of applications.*
• Available in two epoxy formulas • Use for anchoring and doweling in concrete, brick, stone • Superior Bond Strength • Works well in wet or underwater conditions • Bonds a variety of substrates • Corrosion resistant • Minimal shrinkage • See product application guide
• Ultrabond 2™ is a “slow-cure” formula designed specifically for job conditions requiring maximum working times up to 17-20 minutes.* • Ultrabond Dispenser Gun TM22HD is designed to be used with A22 Ultrabond 21.2 oz. cartridges. • Ultrabond Mixing Nozzles break off to accommodate varying hole diameters and depths.
3
ULTRA BOND™ APPLICATION GUIDE
Ultrabond 1
Ultrabond 2
Ultrabond 1
Ultrabond 2
Base Materials
APPLICATIONS
Concrete
• • • • • • •
• • • • • • • •
Horizontal anchoring and doweling Overhead anchoring and doweling Vertical anchoring and doweling Hollow block anchoring and doweling Seismic repair and upgrade Concrete repair - non structural
• • • • • •
• • • •
Lightweight and aerated concrete Grout-filled concrete block Hollow concrete block (CMU)
Solid Brick Hollow Brick
Stone
Bonding applications (variety of materials)
O
• *Gel and Minimum load time based on substrate temperature of 78°F. Gel and cure times increase as substrate and cartridge temperature decreases. • - Ideal choice O - Possible choice depending on application and job conditions
Ultrabond 1 8-10 min.
Ultrabond 2 17-20 min. 10 hours
GEL AND CURE TIMES*
Gel time
Minimum load time
4 hours
Temperature range for applying product
35°F - 115°F 35°F - 115°F
ULTRABOND 1300 Part No.
Description
Size
907.02130
A22 Anchor Epoxy
21.2 oz Cartridge
• Load Time: 2 hours • Tension Load (1/2”): 14,146 lbs. • Color (mixed): Gray
• Two component gel 1:1 epoxy gel • 100% solids high modulus structural gel • Solvent-free • No Odor • High Strength, moisture insensitive, & non-sag
• Applications: Fastening in grout filled block and unreinforced masonry, Seismic anchoring and bracing, grouting dowel bars and tie bars for full-depth concrete pavement repairs, bonding raised pavement markers to concrete or asphalt, pick proof sealant – windows, doors, locks, etc. (e.g. correctional facilities), and capping paste for crack-injection
• High heat deflection up to 131°F • Temperature range: 40-110°F • Engineers choice for setting adhesive anchors in elevated temperature environments • Working Time: 20 minutes
SIMPSON STRONG-TIE ANCHOR ADHESIVE Part No. Description
Size
907.0219
Set-XP10
8.5oz cartridge
• 1:1 high solids, epoxy based, two-component system • Optimum performance in cracked and uncracked concrete • Tested in accordance with ICC-ES AC308 and 2009 IBC requirements
• Suitable for use in damp or wet anchoring sites • Cure time is 24 hours at 70°F (21°C); 72 hours at 50°F (10°C) • 22oz cartridge mixing nozzle - 907.02301
Copyright © 2025 Winzer 800-527-4126
3-3-10
Made with FlippingBook - Online magazine maker