CHEMICALS 3 Sealants & Adhesives
ADHESIVES — THREADLOCKERS & RETAINERS (continued)
PERMATEX ® SURFACE PREP ACTIVATOR FOR ANAEROBICS
Net Weight
Permatex Part No.
Can Size 6 fl oz
Part No.
889.219
4.5 oz (128 g)
24163
• Klean N’ Prime • Non-CFC - solvent based surface activator • Speeds cure of threadlockers by 50% • OEM Specified as Loctite Primer N, 7649 • Increases threadlocker strength
• Recommended for use in cold weather • Can be used as a general purpose cleaning solvent • Fixture Time: 2 minutes • Applications: All nut and bolt threadlocker applications
3
ND BEARING MOUNT FOR CLOSE FITS
Net Contents
Part No.
889.60950
50 ml (1.70 fl oz)
• Low viscosity, rapid curing anaerobic adhesive for press fit or slip fit assemblies • Maximum gap fill = .005” • Color: Green
• Adds up to 3,000 psi holding power • Applications: bushings, bearings, oil seals, ring gear bolts, differential lock pins
Part No. Color Cure Time (Fixture/ Full Cure LOCTITEX ® QUICKTAPE™ 249™ • Threadlocker in tape form • Easy to use • Can be pre-applied for future assembly 889.35630 Blue 30 min / 24 Hours
Torque, In-lbs. Break/Prevail
Loctite Part No.
Size
74/47
1372605 260” roll
• No mess, no waste • A MUST for every toolbox
LOCTITE ® BEARING MOUNT STICK Part No. Net Weight
Loctite Part No.
889.37619
0.32 oz (9 g)
39150
• High temperature • Revolutionary method to bond non-threaded, cylindrical metal assemblies. • Works just like Loctite ® Bearing Mount liquids • Secures parts, seals joints, and prevents corrosion.
• Replaces clamp rings, set screws, and snap rings • Applications: bushings, bearings, oil seals, ring gear bolts, differential lock pins, axle bearings, water and power steering pump pullies
Copyright © 2025 Winzer 800-527-4126
3-3-14
Made with FlippingBook - Online magazine maker