CHEMICALS Sealants & Adhesives 3
SEALANTS — GASKET MAKERS (continued)
PERMATEX ® MOTOSEAL 1 ULTIMATE RTV SILICONE GASKET MAKER — GREY Part No. Net Weight
Permatex Part No.
889.770
2.7 oz (76 g)
29132
• For use on all two-cycle and four-cycle engines • Resistant to gasoline • Solvent-based bond fully seals within 20 minutes • Effective at temperatures up to 350°F continuous, 400°F intermittent • Performs well at low temperatures • Ideal for use on frequently disassembled engines
• Flexible bond is highly effective on irregular and uneven joint surfaces • Applications: Transmission case halves, cylinder head top covers, center and end covers (transmissions), crank case halves, cam covers, exhaust manifold seals, timing chain cases, side covers, clutch housings
3
DIRKO SILICONE SEALANT
Net Contents
Part No.
889.7501
70 ml
• Permanently elastic universal sealing compound • Seals surfaces, gaps and cracks • High Strength • Stops leakage of oil, water and air
• Resistant to ozone, sunlight, extreme weather conditions, hot and cold water, sea water, greases, mineral oils, aliphatic hydrocarbons, detergents and others • Temperature Range: -122°F to + 356°F (-50°C to +180°C) • Uses: Sealant from the exterior between surfaces without disassembly, or in combination with flat gaskets
HYLOMAR AEROGRADE PL32M GASKET & JOINTING COMPOUND
Net Weight
Part No.
889.1000
3.5 oz
• Non-hardening , high temperature gel-type sealant • Temperature range: –60°F to 480°F • Resists: gasoline, kerosene, antifreeze, oil, synthetic lubricants & fluorocarbon refrigerants • Use as a Flange Sealant, Gasket Dressing or Thread Sealant
• Seals rigid flanges with gaps up to .010” • Provides instant sealing for immediate leak testing • Self-healing after severe joint movement, thermal cycling of bi-metal components, shock & vibration • Easy disassembly & non-corrosive
• Solventless, one-component, fluid type RTV • White, slow setting liquid gasket (set to touch in 90 minutes) • Full cure in 15-16 hours • Low shrinkage makes it ideally suited for sealing large clearances THREE BOND 1211 LIQUID GASKET SEALANT Part No. Net Contents 889.11211 100 g Tube
• Commonly used as a formed in place gasket • Good elasticity, temperature resistance & chemical resistance after curing • Excellent resistance to water, antifreeze, gasoline & engine oils • Temperature range: -76°F to 482°F
Copyright © 2025 Winzer 800-527-4126
3-3-27
Made with FlippingBook - Online magazine maker