CHEMICALS 3 Sealants & Adhesives
SEALANTS — GASKET MAKERS (continued)
PERMATEX MUFFLER & PIPE SEALANT FOR MUFFLERS, TAILPIPES, AND CATALYTIC CONVERTERS
Net Weight 3 oz Tube
Part No.
889.0021
• Seals holes and leaks • Waterproof and Non-shrinking • Spreads easily • Resists Temperatures to 2000°F
• Makes new installations more secure. • Applications: Mufflers, tailpipes, joints and catalytic converters
3
PERMATEX® PERMASHIELD™ FUEL RESISTANT GASKET DRESSING & FLANGE SEALANT
Net Weight 2 oz Tube
Part No.
889.797
• Polyester urethane based gasketing compound • Withstands extreme temperature changes without hardening • Remains tacky enabling repeated assembly and disassembly of parts • Suitable as either a gasket maker or a gasket dressing • Operating temperature range of -60F to +500F
• Stands up against common engine fluids including: oil, gasoline, ethanol, water and anti-freeze • Prevents contamination from dust and moisture • Ideal in high performance automotive applications • 50 state compliant
PERMATEX ® ANAEROBIC FLANGE SEALANT (515) GASKET MAKER – PURPLE
Equivalent To Loctite 515
Net Contents
Permatex Part No.
Part No.
889.4575
50 ml (1.69 fl oz)
51531
• Purple gasketing material for use on rigid machined flanges with less than .015” gap • Seals all surface imperfections • Eliminates preformed, pre-cut, paper, rubber & cork gaskets • OEM approved: Use where OEM’s specify “anaerobic” gasket • Temperature range: -65°F to 300°F • Active metal, more ferrous
• Flexes with flanges that move in service due to vibration, pressurization or thermal changes • Parts may be returned to service in 1 hour • Applications: Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings & o-ring replacement
PERMATEX ® ANAEROBIC GASKET MAKER (518) Part No. Net Contents Package Permatex Part No.
Equivalent To
889.4575183
6 ml (.20 oz)
Tube Tube
51817 51813
Loctite 518 Loctite 518 Loctite 518
889.4575180 50 ml (1.69 fl oz)
889.4575185 300 ml (10.14 fl oz) Cartridge 51845
• Red flange sealant eliminates preformed, precut, paper, rubber & cork gaskets • Anaerobic adhesive/sealant • Non-corrosive, resists caustics & solvents • Temperature range: -65°F to 300°F (-54°C to 149°C) • Flexes with flanges that move in service • Only cures between mating flanges. Excess material will not cure & block passages • No re-torgueing • Ferrous, non-active metals (chrome) • Structural adhesive • Non-shimming
• Applications: differential assemblies, transmission covers, flywheel & clutch housings, water pumps, thermostat housings, oil pans, timing covers, transmission shift bar housings or any other rigid flat mating surfaces except exhaust systems. • Designed exclusively for aluminum, iron and steel mating surfaces with less than .015” gap. (Gaps up to .050” material can be used with primer.) • Note: Allow product to cure a minimum of two hours.
Copyright © 2025 Winzer 800-527-4126
3-3-28
Made with FlippingBook - Online magazine maker