CHEMICALS 5 Automotive Repair/Maint
AUTOMOTIVE REPAIR & MAINTENANCE — POLYURETHANE SEALANT & ADHESIVE
3M™ URETHANE SEAM SEALER FOIL PACK SAUSAGE
Net Contents
Part No.
Color
891.08361
10.5 fl oz (310 ml)
Gray
• High quality, single component formula adheres well to bare metal, primed metal and painted surfaces • Automotive seams such as door skins, rocker panels, rear body panels, trunk seams, floor pans, etc. • General Purpose • Interior Seams & Joints • Joint Filling
• Moisture curing property provides excellent performance in high heat and humidity environments • Non-Shrinking, non-cracking, low/no odor formula remains flexible and offers superior results to solvent-based sealers • Paintable after 30-45 minutes • Can be smoothed to a featheredge or brushed
Tensile Strength: Good Flexibility: Excellent
(230 psi)
600% Elongation
Base
Moisture Curing Urethane
Density lbs./Gallon (Approx.)
9.8
Flash Point
92°F (33°) (closed cup method)
3
Solids Content (Approx.)
95%
Consistency
Viscous Paste
Service Temperature
-20°F to 180°F (-28°C to 82°C)
Solvent
Minimal Xylene
DOMINION SURE SEAL SURE-THANE BLACK
Net Contents
Part No.
Color
(nozzle included)
891.9036
10 fl oz (292 mL)
Black
• SURE-THANE is a one-component, permanently flexible, polyurethane adhesive sealer. • Cures in the presence of moisture and oxygen to produce a high-strength adhesive that can replace rivets, welds and other fasteners. • Specifically developed for use in the repair and construction of trailers, trucks, buses, trains, RV utility bodies, van conversions and specialty vehicles.
• Bonds to all primed or painted metals and most automotive plastics • Duplicates OEM factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and any other application in which a non-sag cosmetic seam sealer is required.
AUTOMOTIVE REPAIR & MAINTENANCE — SEAM SEALERS
WINZERFLEX MS SOLVENT-FREE SPRAYABLE SEAM SEALER
Net Contents
Part No.
Color
(nozzle included)
891.80051
Gray
11-3/4 oz. (333g)
• Reproduces OEM seams and textures • Solvent-Free — Contains no solvents, silicones or isocyanates • Remains permanently flexible
• Shelf life — Product will last in spray gun for months • Apply with spraygun 697.77300 (see below)
SEM SPRAYABLE SEAM SEALER
Net Weight
Part No.
Color
891.8008.3 891.8009.3 891.8010.3 891.8011.3
Gray
9.5oz 9.5oz 9.5oz 9.5oz
Tan
Black White
• OEM recommended • Direct-to-metal • Paintable immediately with most solvent-based coatings • Remains flexible without shrinking or cracking • Colors match many OEM sealers • Corrosion resistant
• Resistance weldable • Excellent adhesion • Working Time: 20 min • Set Time: 1 hr • Paint Time: 0-24 hr
2-IN-1 Seam Sealer is a beadable and sprayable, high performance, one-component MSP seam sealer for interior or exterior seams and OEM sprayed sound-dampening pads.
SEM 1K SEAM SEALER
Net Weight
Part No.
Color Gray Beige Black White
891.800822 891.800922 891.801022 891.801122
10.1 oz tube 10.1 oz tube 10.1 oz tube 10.1 oz tube
• OEM recommended • Direct-to-metal • Paintable immediately with most solvent-based coatings • Remains flexible without shrinking or cracking • Colors match many OEM sealers
• Optimal working time • Corrosion resistant • Resistance weldable • Excellent adhesion
Copyright © 2025 Winzer 800-527-4126
3-5-6
Made with FlippingBook - Online magazine maker