SHOP SUPPLIES 1 Tapes
TAPE — ATTACHMENT (continued)
MOUNT TAPE
3M™ SCOTCH-MOUNT™ NAMEPLATE REPAIR TAPE
Size
Description Part No.
820.28762 820.28763
3/4" X 15YD 3/4" X 15YD
Black 5 Mil. Clear 5 Mil.
3M Part No.
Size
Color
Part No.
• FOR POWDER COATED SURFACES: Provides a quick and easy all-acrylic bonding method on many painted and powder coated surfaces with immediate handling strength—no curing time needed • SMOOTH AND SEAMLESS: tape is designed as an alternative to mechanical fasteners, such as rivets, welds, and screws, or liquid adhesives • MULTI-SURFACE: Adheres to various materials, such as stainless steel, and works with minimal surface preparatio • Designed for indoor / outdoor use • Polyethylene Film
820.06385
.23” x 5’ yards
Gray
06385
• Automotive acrylic foam tape • Adheres emblems, nameplates, etc. to vehicle surfaces • Thinner foam allows for a flush mount to the vehicle’s surface • Thickness: 0.8mm (.030”) • Permanently adheres to OEM and aftermarket paint systems
3M™ DOUBLE-COATED POLYETHYLENE FOAM TAPE
DOUBLE-SIDED ATTACHMENT TAPE
Size
Thickness 3M Part No. Part No.
4
Size
Part No.
3/4” x 72 yards .8mm (.031”) 04492W 820.4492 1” x 36 yards 1.6mm (.062”) 04496W 820.4496 • Conformable closed cell foam • High strength acrylic adhesive provides good initial tack & offers high ultimate adhesion to a wide variety a of surfaces • Color: White
888.0014 888.0012 888.0034 888.0078 888.0001
1/4” x 60’ 1/2” x 60’ 3/4” x 60’ 7/8” x 60’ 1” x 60’
Note: All tapes are .045” (1.2mm) thick.All tapes are black with blue backing. High-strength, all-weather mounting tape is ideal for a wide variety of automotive applications (see diagram below). • OEM Approved — Attachment tape is currently in use for a variety of domestic OEM applications, including Ford, G.M., and Chrysler • Polyurethane foam with acrylic adhesive — This high-tech combination is designed for com patibility with late model high-solids and clear coat paint systems • Super long life — Its unique properties resist oxidation, fungi, and weathering • Strong Adhesive Bond — Adhesion values meet or exceed a variety of GM, Ford, and Chrysler specifications (see next page for test data) • Ideal for name-plates and emblems: Tape polyurethane foam gives it greater cold shock/slam properties than standard acrylic foams
3M™ DOUBLE-COATED URETHANE FOAM TAPE
Size
Thickness Part No.
820.06455
1” x 36 yards
1/16”
• Ideal for a multitude of general purpose, indoor mounting and joining applications • Open-Cell, soft and conformable, high in strength • Functions well for extended periods at temperature of 104° C/ 200° F
DOOR EDGE MOLDINGS
PILLAR TRIM
REVEAL MOLDINGS BODY SIDE MOLDINGS
Applications
GAFFERS TAPE
SPOILERS
Size
Thickness Part No.
888.208
2” x 60’ yards
11.0 Mil.
AIR DAMS
BUMPER TRIM
• Used to attach paper barrier between door panel and structure of door • 11.0 mil thick • Matte black finish to match OEM tapes
ROCKER PANEL MOLDINGS
BODY CLADDING
NAMEPLATES, EMBLEMS, AND ORNAMENTATION (rigid or flexible)
WHEEL WELL MOLDINGS
GROUND EFFECTS
AUTOMOTIVE ACRYLIC PLUS ATTACHMENT TAPE 820.06386 • Automotive OEM (Original Equipment Manufacturer) approved acrylic foam core and adhesive technology. 3M Acrylic Plus Tapes are • Stronger, higher performing, high stress handling products than other automotive attachment tapes. These tapes offer more robust performance to a wide variety of automotive substrates. • Typical applications include body side moldings, claddings, rock panel trim, wheel flares, bumper trim and other exterior and interior automotive trim components.
ATTACHMENT TAPE — CLEAR
Description
Part No.
888.4965 888.49651
1/2” x 36’ yards (12mm x 33mm) 3/4” x 60’ yards (19mm x 55mm)
• Double-sided acrylic adhesive on a polyester film for permanent mounting of trim and emblems • Adheres to plastics, metals and woods • Thickness: .008”
Copyright © 2025 Winzer 800-527-4126
4-1-6
Made with FlippingBook - Online magazine maker