SHOP SUPPLIES 2 Hand Tools
TOOLS — HEX & TORX KEYS
BALLDRIVER ® POWER BITS Size Part No. 5/64” 692.9.564 3/32” 692.9.332 7/64” 692.9.764 1/8” 692.9.18 9/64” 692.9.964 5/32” 692.9.532 3/16” 692.9.316 7/32” 692.9.732 1/4” 692.9.14 5/16” 692.9.516
Size
Part No.
692.9.38 692.9.12 692.10.2 692.10.25 692.10.3 692.10.4 692.10.5 692.10.6 692.10.12
3/8” 1/2”
2.0 mm 2.5 mm 3.0 mm 4 mm 5 mm 6 mm 12 mm
• Designed for power tools having 1/4” hex adapter • Saves time and increases productivity • Overall length 3”
BALLDRIVER ® L-WRENCH SETS Description Sizes
Part No.
Balldriver ® L-wrench sets are ideal where a variety of tool sizes are required. All set are packaged in key case. Wrenches slip easily into individually marked slots and twist to lock secure place.
.050,1/16,5/64,3/32, 7/64,1/8,9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8
692.13.1 692.13.2
Inch set
Metric set
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10
BALLDRIVER ® - L-WRENCHES (LONG ARM)
INCH
METRIC
4
Size .050” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4”
Part No.
Size
Part No.
692.11.050 692.11.116 692.11.564 692.11.332 692.11.764 692.11.18 692.11.964 692.11.532 692.11.316 692.11.732 692.11.14 692.11.516 692.11.38 692.11.716 692.11.12 692.11.916 692.11.58 692.11.34
692.12.127 692.12.15 692.12.2 692.12.25 692.12.3 692.12.4 692.12.5 692.12.6 692.12.8 692.12.10 692.12.12 692.12.14 692.12.17 692.12.19
1.27 mm 1.5 mm 2 mm 2.5 mm 3 mm 4 mm
• Save time with the ballpoint on the long blade to reach remote and blind location • The short end allows high torque and features precision chamfering that eliminates cut off burrs
5 mm 6 mm 8 mm 10 mm 12 mm 14 mm 17 mm 19 mm
TOOLS — PUNCHES & CHISELS
FLAT CHISELS
Stock Point Taper Length O.A.L. Part No. 3/8 5/32 4-1/4 9 700.7568 1/2 3/16 5 10 700.7570 LONG TAPER DRIFT PUNCHES
Stock
Blade Length Part No.
700.7576 700.7572 700.7574 700.7575
7/16 1/2 3/4
1/2 5/8 7/8
6
6-1/2 7-1/2
7/8
1
8
PILOT PUNCHES
PIN PUNCHES
Number
Size 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16
Part No.
Stock Point Pin Length O.A.L.
Part No.
700.7550 700.7551 700.7552 700.7553 700.7554 700.7555 700.7557 700.7558
1 2 3 4 5 6 8 9
700.7559 700.7562 700.7561 700.7563
5/16 1/8 5/16 5/32 3/8 3/16
1 1
4-3/4
5
3-1/2 1-1/4
5-1/4
1/2
1/4
6
SOLID PUNCHES
Stock
Point
O.A.L.
Part No
700.7567 700.7566 700.7565
3/8 3/8 3/8
3/32 3/16
5 5 5
ARCH PUNCHES
1/4
Size
Part No.
690.50.14 690.50.12
1/4 3/8 1/2 5/8 3/4
690.50.38 690.50.58 690.50.34
CENTER PUNCHES
• For punching holes in leather, rubber, gasket material and soft metals • Inside taper for clearance • Heat treated Sheffield forged steel
Stock
Length
Part No
690.60.38 690.60.516
3/8 5/16
5 5
Copyright © 2025 Winzer 800-527-4126
4-2-12
Made with FlippingBook - Online magazine maker