SHOP SUPPLIES Welding 4
WELDING — MIG WIRE (continued)
1116LH (LOW HYDROGEN) SOLID WIRE
TM
Wire Diameter Spool Size Part No. .023 11 lb. 686.610.023.11 .030 11 lb. 686.610.030.11 .035 2 lb. 686.610.035.2 .035 11 lb. 686.610.035.11
Wire Diameter
Spool Size
Part No. .035 33 lb. 686.610.035.33 .035 10lb. 686.610.0350.10 .035 33lb. 686.610.035.33
• Tensile Strength: up to 120,000 psi • Elongation: 23% • Operating Range: .023 (35-70 amps); .030 (75-120 amps); .035 (90-150 amps); 1/16 (150- 200 amps) • Shielding Gas: 75%Ar/25%CO2
• Designed to provide high-strength welds on low and medium alloy steels, including high strength steels such as T-1, HY-80/90, and proprietary alloys such as T-1 type A & B, Marjari R, Cor-Ten, Manganese, Vanadium. • Deposits are tough yet machinable • Can be used as a build-up prior to applying harder overlays • Welding Positions: all positions
1116LH (LOW HYDROGEN) FLUX CORED WIRE
TM
Wire Diameter Spool Size Part No. .030 2 lb. 686.610.0300.2 .035 33 lb. 686.610.0350.33
• Operating Range: .030 (75-120 amps); .035 (90-150 amps) • Shielding Gas: 75%Ar/25%CO2
• A flux cored welding wire designed for low and medium alloy steels • Welding Positions: all positions • Tensile Strength: up to 120,000 psi • Elongation: 23%
4
38SS (STAINLESS STEEL) SOLID WIRE
TM
Wire Diameter
Spool Size 2 lb.
Wire Diameter
Spool Size
Part No.
Part No. .030 10 lb. 686.620.030.10 .035 2 lb. 686.620.035.2 .035 12.5 lb. 686.620.035.125
686.620.023.2
.023 .023 .030
10 lb. 686.620.023.10
686.620.030.2
2 lb.
• Tensile Strength: up to 83,000 psi • Elongation: 36% • Operating Range: .023 (50-125 amps); .035 (100-150 amps) • Shielding Gas: Ar or CO2 mix
• Excellent for welding 300 series stainless steels • Designed to deposit smooth, corrosion resistant welds without cracking or porosity • Can be used as a build-up prior to applying harder overlays • Welding Positions: all positions
38SS (STAINLESS STEEL) FLUX CORED WIRE
TM
Wire Diameter
Spool Size
Part No.
686.620.0350.2
.035
2 lb.
• Tensile Strength: up to 85,000 psi • Elongation: 42% • Operating Range: 75-100 amps • Shielding Gas: Ar or CO2 mix
• A flux cored welding wire designed for welding 300 series stainless steel • Designed to deposit smooth, corrosion resistant welds without cracking or porosity • Welding Positions: all positions
1120HF (HARDFACING) FLUX CORED WIRE
TM
Wire Diameter Part No. 1/16 25 lbs. 686.652.1160.25 Spool Size
Wire Diameter Spool Size Part No. .045 10 lbs. 686.652.0450.10 .045 25 lbs. 686.652.0450.25
• Welding Positions: Flat, Horizontal • Tensile Strength: N/A • Elongation: N/A • Hardness: Rockwell C59-62 • Operating Range: .045 (125-250 amps); 1/16 (150-300 amps) • Shielding Gas: 75%AR/25%CO2
• A complex alloy designed to offer excellent abrasion resistance along with moderate impact resistance • Ideal alloy combination where hardness and toughness are required on carbon and alloy steels, manganese steels, and cast iron • Low spatter, smooth overlays, and high deposition rate • Use on crusher jaws, hammers, bucket lips and teeth, wear plates, pins, axles, shafts, cams, etc.
521AL (ALUMINUM) SOLID WIRE
TM
Wire Diameter
Spool Size Part No. 1 lb. 686.660.030.1 1 lb. 686.660.035.1
Wire Diameter
Spool Size Part No.
.035 3 lb. 686.660.035.3 .045 1 lb. 686.660.045.1
.030 .035
• Operating Range: .023 (50-80 amps); .030 (60-100 amps); .035 (100-150 amps); .045 (150-200 amps) • Shielding Gas: 100% Ar • Note: alloy contains silicon and is not recommended if finished work is to be anodized. • Qualified to ER4043
• Excellent general purpose, high tensile strength aluminum welding wire • Produces a bright weld finish that is less sensitive to cracking
• Welding Positions: all positions • Tensile Strength: up to 34,000 psi • Elongation: 18%
Copyright © 2025 Winzer 800-527-4126
4-4-5
Made with FlippingBook - Online magazine maker