CUTTING TOOLS Drills 1
DRILLS — HEX SHANK
MECHANICS LENGTH HEX SHANK DRILLS - 1/4” QUICK RELEASE Diameter Overall Length Part No. 1/16 2-5/8 661.12.116 3/32 3-1/4 661.12.332 1/8 3-1/2 661.12.18 9/32 3-13/16 661.12.932 5/32 3-1/2 661.12.532 3/16 3-3/4 661.12.316 7/32 4 661.12.732 1/4 4-1/4 661.12.14 5/16 4 661.12.516 11/32 4-7/32 661.12.1132 3/8 4-1/4 661.12.38 13/32 4-1/2 661.12.1332 7/16 4-1/2 661.12.716 15/32 4-7/8 661.12.1532 1/2 5 661.12.121 661.12.15322 • Drill is a mechanic length with a quick release shank • Manufactured from special Hi-Molybdenum tool steel • 135° split point for fast penetration and accurate starting without center punch • Gold surface treated • Specially designed for hand held drills • Quick release eases changing of cutting tools • Made in USA - 12 - Piece Hard Case Set with Quick Release Adaptor (1/16 - 1/2) - 7-Piece Soft Pouch Set (1/16 - 1/4) 661.12.15321 661.12.15322
661.12.15321
*1/4” and smaller are 2 piece pressed and epoxy fitted
DRILLS — WOOD
6
WOOD BORING POWER BITS
SETS
Included In Set
Size 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1-1/8 1-1/4 1-3/8 1-1/2 15/16 1
Part No.
Set #
Qty.
Part No.
661.36.14 661.36.516 661.36.38 661.36.716 661.36.12 661.36.916 661.36.58 661.36.34 661.36.78 661.36.1516 661.36.1 661.36.118 661.36.114 661.36.138 661.36.112
3 3
661.36.6 661.36.13
2 3
6 pc
1, 2, 3
3
13 pc
1, 2, 3
3
1, 2, 3 1, 2, 3
2, 3
3
2, 3
• Cuts clean accurate holes in all soft and hard woods,foam core, plastic, many metallic building sidings and foam insulation
DRILLS — BELL HANGER
MILWAUKEE ® BELL HANGER BITS
Overall Length
Diameter
Part No.
748.13.7125 748.13.7325 748.13.7137 748.13.7237 748.13.7337
1/4” 1/4” 3/8” 3/8” 3/8”
12” 24” 12” 18” 24”
• Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed • Coated Flutes for Fast Chip Removal • Aggressive tip geometry provides faster cutting
Copyright © 2025 Winzer 800-527-4126
6-1-15
Made with FlippingBook - Online magazine maker