CUTTING TOOLS 3 Saw Blades & Cutters
SAWS — JIG SAW BLADES (continued) Shank
ALFA ®
L x W x T (Inches)
TPI
Applications
Part No.
660.04.410
10 4 x 5/16 x .050
Smooth wood cuts, plastics
Bosch
SAWS — RECIPROCATING BLADES
RECIPROCATING BLADES
TPI
Decription
Applications
Part No.
660.1000 660.1001 660.1002 660.1003 660.1004 660.1005 660.1006 660.1007 660.1008 660.1009 660.1010 660.1011 660.1012 660.1013 660.1014 660.1015 660.1016 660.1017 660.1018 660.1019 660.1020 660.1021 660.1022 660.1023 660.1024 660.1025 660.1026 660.1027 660.1028 660.1029 660.1030 660.1031 660.1032 660.1033 660.1034
18 14 18 24 14 18 24 14 18 14 18 10
3x5/16x.035 4x3/4x.035 4x3/4x.035 4x3/4x.035 6x3/4x.035 6x3/4x.035 6x3/4x.035 8x3/4x.035 8x3/4x.035 9x3/4x.035 12x3/4x.035 6x3/4x.035 6x3/4x.035 8x3/4x.050 9x7/8x.062 9x7/8x.062 12x7/8x.062 12x7/8x.062 6x1x.042 6x1x.042 9x1x.042 9x1x.042 12x1x.042 12x1x.042 6x7/8x.062 6x7/8x.062 9x7/8x.062 9x7/8x.062 12x7/8x.062 12x7/8x.062 6x3/4x.035 6x3/4x.050 6x3/4x.050 9x3/4x.035 12x3/4x.050
Machinable Metals up to a 1/4”
• Straight tooth pitch gives a smooth cutting action • Bi-metal construction for long cutting life and heat and wear resistant • Shop Pro Bi-metal blades reduce breakage and last longer than conventional carbon and all high speed steel blades • MADE IN THE USA
Wood, Plastic, Ferrous & Non Ferrous Metals
10/14 10/14
6
10
Rough-in cutting all types of wood, wood composites, and nail embedded wood
6
10 14 18 14 18 14 18 10 14 10 14 10 14
6
Machinable Metals, Wood, Wood Composites, Plastic or Rubber
All Types of machinable metal encountered in vehicle extraction and demolition
6 6 6 6
Wood, Wood Composites, and Nail-embedded wood
5/8
ALFA ®
L x W x T (Inches)
TPI
Applications
Part No.
660.02.45814 660.02.45818 660.02.45824
14 4 x 3/4 x .035 18 4 x 3/4 x .035 24 4 x 3/4 x .035
Metal over 1/8 thick, barstock & angles Metal over 18 gauge, conduit, pipe, tubing Metal 18 gauge & under, galvanized pipe
• Bi-Metal Construction — Matrix HSS cutting edge with flexible alloy back resist tooth strippage • Tooth hardness of RC-66-67 enables a sharp long lasting cutting edge • Shatter proof — Handles the toughest cutting jobs • Made in USA
Wood, nail embedded wood, compositions, plastics, cast aluminum & non-ferrous metals
660.02.56810
10 6 x 3/4 x .035
660.02.65814 660.02.65818 660.02.65824 660.02.83410 660.02.93414 660.02.6346 660.02.9346
14 6 x 3/4 x .035
Metal over 1/8 thick, barstock & angles
Metal over 18 gauge to 1/8” thick conduit, pipe, channels & tubing Metal 18 gauge & under, galvanized pipe Wood, nail embedded wood, composition materials, plastic, cast aluminum & light metals
18 6 x 3/4 x .035
24 6 x 3/4 x .035
10 8 x 3/4 x .035
14 8 x 3/4 x .035 6 6 x 3/4 x .050 6 9 x 3/4 x .050 6 12 x 3/4 x .050
Large diameter pipe
Heavy duty for all woods & nail embedded woods Heavy duty for all woods & nail embedded woods
Heavy duty for all woods & nail embedded woods 660.02.12346 6 6 x 3/4 x .035 Plastic with metal lath, sheet rock, plasterboard, plaster walls. Tooth design cuts both forward & on back stroke 660.02.63461
Copyright © 2025 Winzer 800-527-4126
6-3-2
Made with FlippingBook - Online magazine maker