CUTTING TOOLS Saw Blades & Cutters 3
CUTTING — BLAIRCUTTERS
660.6055 BLAIRCUTTER KIT (Blair No. 13218) comes in a handy plastic case and contains 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, and 5/8” diameter cutters as well as a (Blair No. 13216) Arbor with Retractable Pilot and three extra Pilots.
BLAIRCUTTERS – SOLD SEPARATELY Economy and quality. Fast,accurate, burr-free holes for materials up to 3/16” thick in seven sizes for 1/4” and larger drill chucks. Spring loaded pilot “pops” the slug from the cutter.
ARBOR AND PILOT FOR BLAIRCUTTERS & SPOTWELD CUTTERS
Blair Part No.
Diameter
Part No.
Blair Part No.
660.6005
1/4”
13200*
Description
Part No.
FOR SHEET METAL (FOR THINNER MATERIALS) • Precision ground high speed steel Blaircutters, 1/4” thru 5/8” diameter • Precision slug-ejector type alloy steel arbor fits 1/4”, 3/8”, and 1/2” chucks • Screw adjustment of Ejector Pilot tension spring • Long wearing replacement pilots • Rugged teeth provide longer tool life • Cuts holes faster and cleaner than twist drill • Requires much lighter equipment with only a fraction of the power and effort needed for twist drilling and cuts without distorting inner panel • Much lower cost-per-hole than for twist drills and less fixturing
1/4” Arbor with retractable pilot for Blaircutters and Spotweld Cutters
660.6045
13216
6
660.6050
Retractable Pilot
13217*
* Noted Blair Number refers to a 3 piece package while part number refer to a 1 piece package.
CUTTING — SPOTWELD CUTTERS
BLAIR DOUBLE-END SPOTWELD CUTTER ASSEMBLY
660.6060
Blair Part No.
Description
Part No.
660.6060 660.6040 660.6050 660.6045
Spotweld Cutter Assembly
13219
Adjustable stop rod (Retractable Pilot) lets you set depth of cut precisely, so only the outer panel is cut thru.
Double-End Cutter
13214*
Retractable Pilot
13217*
Arbor w/ Pilot
13216
• The Spotweld Cutter Assembly contains one Arbor, one retractable Pilot, and one 3/8” double-End Cutter • Twice the tool life • Unique 3/8” diameter hardened and precision ground cutting tool • Makes removing spot welded body panels fast and easy • Hollow design cuts around weld, thus hardness does not affect tool sharpness • Adjustable depth rod sets the tool so only the outer panel is cut through • Leaves the underlying panel undamaged • When Double-End Cutters become dull, simply unscrew the cutter from the arbor, and reassemble with the new teeth exposed • Arbor can be used in any 1/4”, 3/8”, or 1/2” chucks * Noted Blair Nos. refer to a 3 pc. package while Winzer Part Nos. refer to a 1 pc. package.
660.6050
660.6040
660.6045
Copyright © 2025 Winzer 800-527-4126
6-3-9
Made with FlippingBook - Online magazine maker