FLUID POWER Brass Fittings 2
FITTINGS — BRASS AIR HOSE FERRULES
HOSE FERRULES
CRIMPING TOOL FOR BRASS AIR HOSE FERRULES 675.21.1 • Comes with five crimping dies (#1-5 below) • Additional die blocks available (#7, #8, #10 below) • Use the next larger bore size for the ferrule selected
Ferrule I.D.
Equivalent Bridge No.
Part No.
675.20.478 675.20.500 675.20.527 675.20.562 675.20.593 675.20.625 675.20.656 675.20.687 675.20.718 675.20.750 675.20.781 675.20.812 675.20.825 675.20.850 675.20.900 675.20.937
.478 .500 .527 .562 .593 .625 .656 .687 .718 .750 .781 .812 .825 .850 .900 .937
7321 7322 7323 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335
Use with standard hose barb fittings to make permanent connections to hose. Select ferrule I.D. dimension to closely match your hose O.D.
5092A 7342A
Note: Because rubber hose tolerances vary up to ±1/32” on the I.D. and O.D., it is necessary to fit ferrules and fittings to each individual hose being made up.
CRIMPING TOOL FOR LARGE DIAMETER BRASS AIR HOSE FERRULES 675.22.1 • For use with 7/8” to 1-1/2” OD hose • Sold without dies
DIE SETS FOR LARGE DIAMETER CRIMPING TOOL (7/8” OD TO 1-1/2” OD)
Hose Outside Diameter
Part No.
675.22.1316 675.22.5364 675.22.78 675.22.2932 675.22.1516 675.22.1000 675.22.1250
13/16 53/64 29/32 15/16 7/8
7
1
1-1/4
A properly placed ferrule will fit snuggly on to the hose before Crimping and will be difficult to rotate by hand.
COUPLERS — BRASS REUSABLE
MALE PIPE RIGID Hose I.D.
• Typical Application: Low pressure air, lube and oil lines. • Compatible Hose: H009. • Pressure: Determined by maximum working pressure for hose size. • Material: CA360 brass • Advantages : Reusable and easy to assemble in the field
Hose O.D.
Male NPT
Part No.
897.04.48 897.04.49 897.04.410 897.04.610 897.04.612 897.04.612.6 897.04.6116 897.04.814
1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2
1/2
1/4 1/4 1/4 1/4 1/4 3/8 1/4 1/2
9/16
5/8 5/8 3/4 3/4
Assembly Instructions: 1. Lubricate insert threads and I.D. of hose 2. Push hose into socket until it bottoms 3. Screw insert into socket until insert hex touches socket
11/16
7/8
Copyright © 2025 Winzer 800-527-4126
7-2-17
Made with FlippingBook - Online magazine maker