FLUID POWER Weatherhead Hydraulics 6
HOSES — LOW PRESSURE (continued)
GENERAL PURPOSE AIR/WATER HOSE - RED
Hose I.D.
Hose O.D.
Work Press. (PSI)
Min. Burst Press. (PSI) 1200**/700* 1200**/700* 1200**/600*
Min. Bend Radius
Part No. Per Foot
Danfoss No.
897.010504 897.010506 897.010508 897.0105012 897.0105016
1/4 3/8 1/2 3/4
5/8 3/4 7/8
300**/175* 300**/175* 300**/150*
3
H010504 H010506 H010508 H010512 H010516
3.5 4.5
1-3/16 225**/150*
900**/600*
5.75 7.25
1
1-7/16
200
800
• ** When used with 057’B’ series ends • * When used with ‘U’ series fittings only • Typical Applications: General Purpose Air, water applications where petroleum contact is limited • Inner Tube: EPDM • Reinforcement: Multi-Fiber Spiral
• Cover: RED EPDM • Temp. Range: Air; -40°F to +160ºF (-40°C to +71ºC) Water: 32ºF to +180ºF (0ºC to +93ºC) • Hose Ends: C-O-C ‘U’ Series (-6 to -16); ‘Z’ series • Field Attachable: 057 ‘B’ Series (except -8 and -16), 105 ‘B’ Series (-4 to -12)
HOSES — MEDIUM PRESSURE
SAE J1402 TYPE AI TRUCK HOSE
Hose I.D.
Hose O.D. 31/64 35/64 39/64 47/64 57/64 61/64 1-13/64
Work Press. (PSI)
Min. Burst Press. (PSI)
Min. Bend Radius Danfoss No.
Part No. Per Foot
897.021304.1 897.021305.1 897.021306.1 897.021308.1 897.021310.1 897.021312.1 897.021316.1
3/16
2000 1500 1500 1250 1000 750 400
8000 6000 6000 5000 4000 3000 1600
3/4
H21304 H21305 H21306 H21308 H21310 H21312 H21316
1/4
1
* All reels will be drop shipped from the factory. Contact special order department. ** Size 16 is not approved for Air Brake applications.
5/16 13/32
1.25 1-3/4 2-1/4 2-3/4 3-1/2
1/2 5/8
7/8 **
• Typical Application: General purpose truck hose. For use in air brake, fuel, diesel fuel and high temperature petroleum oil applications • Use with Field Attachable 213N Hose Ends • Inner Tube: CPE • Reinforcement: 1 Fiber Braids - 1 Steel Braid
• Cover: Fiber Braid • Cover Color: Black with 2 green stripes 180° apart • Temp. Range: Air Brake: –40°F to +200°F Hot Oil: –50°F to +302°F • Hose Ends: 213 ‘N’ Series Field Attachable
SAE 100R5 PERFORMANCE, SAE J1402, DOT/FMVSS 106 TYPE AII
Min. Bend Radius
Hose I.D.
Hose O.D.
Work Press. (PSI)
Min. Burst Press. (PSI)
Part No. per Foot
Danfoss No.
897.353.4.1 897.353.5.1 897.353.6.1 897.353.8.1 897.353.10.1 897.353.12.1 897.353.16.1
0.19 0.31 0.31 0.41 0.50 0.62 0.88
0.52 0.59 0.68 0.77 0.92 1.08 1.23
2000 1500 1500 1250 1250 750 400
8000 6000 6000 5000 5000 3000 1600
0.75 1.00 1.25 1.75 2.25 2.75 3.50
H353H04 H353H05 H353H06 H353H08 H353H10 H353H12 H353H16
7
• Application: General purpose truck, marine, hydraulic and fuel hose • Medium Pressure hygraulics, including Power Steering, synthetic oils for transmission coolers, and other High temp applications • Air brake, gasoline, lubricating oil, coolant air, water and Bio-diesel (up to B20) • Temp Range: -49C to +150C (-55F to +302F)
• Inner Tube: High Temp CPE • Reinforcement: 2-Polyester Braids, 1-Wire Braid • Cover: Black Textile • Hose Ends: Field Attachable 247 ‘N’, 069 ‘E’ and FJ3114 Series Crimp Fittings
SYNFLEX 3TR7 MEDIUM PRESSURE HOSE SAE 100R7
Hose I.D.
Hose O.D. 0.33 0.49 0.65 0.82
Min. Bend Radius
Working Pressure
Burst Pressure Danfoss No.
Part No. Per Foot
897.37.02.1 897.37.04.1 897.37.06.1 897.37.08.1
1/8 1/4 3/8 1/2
1/2 1.25 2.00 2.75
3050 3050 2300 2050
12,200 11000 9000 9000
3TR7-02 3TR7-04 3TR7-06 3TR7-08
• Typical Application: General Hydraulics, Material Handling, Chemical Transfer, Marine Steering • Inner Tube: Nylon-lined Core Tube • Reinforcement: Synthetic Fiber • Cover: Black Perforated Polyurethane
• Temp Range: -40F to 212F (-40c to 100c) with water-based or fire- resistant fluids • Hose Ends: Z-Series (w/sleeve, See 897.64 prefix for sleeve selection) • 902 Series and 4TA Series
SYNFLEX CRIMP SLEEVE
Hose ID Size
Danfoss No. FF91064-04S FF91064-06S FF91064-08S
Part No.
897.64.04 897.64.06 897.64.08
1/4 3/8 1/2
Must be used with Z-Series fittings on 897.37. prefix Synflex Hoses
Copyright © 2025 Winzer 800-527-4126
7-6-19
Made with FlippingBook - Online magazine maker