AUTOMOTIVE 6 Wheel & Tire Suspension
TIRE — PATCHES
Size
Part No.
TUBE AND TUBELESS TIRE PATCHES
837.155 837.156 837.157
1-3/4” Small Round (43mm) 2-3/16” Medium Round (57mm) 3-1/8” Large Round (79mm)
Size
Part No.
837.105 837.106 837.107
1-5/8” Small Round (43mm) 2-1/4” Medium Round (57mm) 3-1/8” Large Round (79mm)
• Foilback chemical patches for tube or tubeless tire repairs • Repairs small pin holes in radial tires
• All purpose patches, principally for repair of tubes, but may be applied to pin hole size injuries in passenger tubeless tire innerliners • Effective-economical polyback tube repair patches, Quick-easy installation. Just peel and apply.
REINFORCED TUBELESS TRUCK TIRE PATCHES Size Part No. 3-3/4” x 3-3/4” 2 Ply 837.115 4-1/2” x 4-1/2” 2 Ply 837.116 5-1/2” x 5-1/2” 4 Ply 837.117 6-1/2” x 6-1/2” 4 Ply 837.118
• Extra strong “molded’ section style for bias passenger, truck and off road repairs • Chemically self-vulcanizing, each size is fully reinforced with conventional style tire cord • Not for radial tires
REINFORCED TUBELESS TIRE PATCHES
Size
Part No.
837.165 837.166
2-1/4” Round (57mm) 3” Round (76mm) 3-1/2” Round (90mm)
837.167 • Chemically self-vulcanizing, feather edged, reinforced patches for tube and tubeless tire repairs • Strong, yet flexible enough to last the life of the tire • Fabric reinforced, not for radial tires
UNIVERSAL ROUND TIRE PATCHES
Size
Part No.
837.321 837.322 837.323
1-3/4” (45mm) 2-1/4” (57mm) 3-1/4” (79mm)
• Rubber reinforced patches that for use with any repairable area of a radial or bias-ply passenger tire • Will vulcanize either chemically or with heat • Center patch over injury
RADIAL TUBELESS PASSENGER & TRUCK TIRE REPAIRS Size
Part No. 837.125 837.127 837.130 837.131
1-3/4” x 3” 4-1/8” x 2-3/8”
3” x 4”
3-1/2” x 4
RADIAL PATCHES
• Patches are rayon cord reinforced & designed to withstand truck tire pressure & deflect stresses • May be applied chemically or in the presence of heat • Center patch over injury
Size
Part No.
837.135
1-3/4” x 3” (45mm x 76mm) Small Cord Reinforced 2-1/4” x 4” (57mm x 102mm) Med. Cord Reinforced
• Rubber reinforced repairs designed to be strong yet flexible • Featheredged, chemically self-vulcanizing • Center patch over injury 837.136 2-3/4” x 5-1/2” (70mm x 140mm) Lg. Cord Reinforced 837.137
LEAD-WIRE INSERTS
8
Size 1/8” 1/4” 7/16”
Part No.
LEAD-WIRE COMBO INSERTS
837.220 837.221 837.222
Patch Size
Stem Dia.
Part No.
• Designed to “Fill the Injury” in passenger and truck, radial or Bias-Ply Tires. • Inserts will vulcanize chemically or in the presence of heat curing system, becoming a permanent part of the tire • No special tools required for installation • Install from the Inside-Out, pull through, and cut wire • Sold per box of 20
837.184 837.185 837.183 837.186
1”
1/8”
1-5/8”
3/16”
2”
1/4”
2-1/8”
5/16”
• No special tools required for installation • Will vulcanize chemically or by a heat curing system
RADIAL PATCH AND PLUG COMBINATIONS Patch Size Stem Size Description
Part No.
Reinforced for small injuries up to 1/8”. Tread area only Reinforced, for med. injuries up to 1/4”. Tread area only
837.175
1-3/4” x 3”
5/16”
• Simple application process allows the repairman to fill the hole and patch the inner liner in one procedure • Each stem is coated with vulcanizing rubber to seal out any external contaminants • The patch and stem vulcanize, becoming a part of the repair tire • For use in all types of tires including steel belted radials • For tread area only
837.176
2-1/4” x 4”
3/8”
837.180 837.181
1-3/4” Round 3/16” 2-1/2” Round 5/16”
Tread area only Tread area only
Copyright © 2025 Winzer 800-527-4126
8-6-16
Made with FlippingBook - Online magazine maker