AUTOMOTIVE 6 Wheel & Tire Suspension
ALIGNMENT — SHIMS
CT ILLUSTRATION Nominal Thickness
X ILLUSTRATION
Bolt Opening Part No.
Nominal Thickness
Bolt Opening Part No.
413.12.164 413.12.132 413.12.116 413.12.18
1/64” 1/32” 1/16”
17/32” 17/32” 17/32” 17/32”
413.14.18 413.14.316
1/8”
7/16” 7/16”
3/16”
1/8”
Application: GM Control arm shaft mounting bolts up to 7/16” (10mm) diameter.
Application: GM Control arm shaft mounting bolts up to 1/2” (12mm) diameter.
CC ILLUSTRATION Nominal Thickness
N ILLUSTRATION
Bolt Opening Part No.
Nominal Thickness
Bolt Opening Part No.
413.15.132 413.15.116 413.15.18
1/32” 1/16”
9/16” 9/16” 9/16”
413.13.164 413.13.132 413.13.116 413.13.18 413.13.316
1/64” 1/32” 1/16”
33/64” 33/64” 33/64” 33/64” 33/64”
1/8”
Application: GM Control arm shaft mounting bolts up to 9/16” (14mm) diameter.
1/8”
3/16”
Application: FORD Control arm shaft mounting bolts up to 1/2” (12mm) diameter.
BS ILLUSTRATION
US ILLUSTRATION
Nominal Thickness
Bolt Opening Part No.
Nominal Thickness
Bolt Opening Part No.
413.20.116 413.20.18
1/16”
1/2” 1/2”
413.16.164 413.16.132 413.16.116 413.16.18
1/64” 1/32” 1/16”
5/8” 5/8” 5/8” 5/8”
1/8”
Application: Universal type body shim.
1/8”
Application: Control arm shaft mounting bolts up to 5/8” diameter. Replacement for CO shims
ALIGNMENT — SHIM TOOLS
8
EZ Shim™ Cutter 413.0195
This cutter is a necessary tool for proper cutting of the EZ Shim™. Its thin cutting blades minimize shim breakage and waste
Note: To only be used with EZ Shims
EZ SHIM™ DIAL CHART Makes using the EZ Shim™ a snap. Just dial in the desired change needed for both camber and toe. (included in packet) EZ Shim™ dial chart lists camber and toe changes in decimal degrees only.
FULL CONTACT DUAL ANGLE EZ SHIM™ Adjusts Camber and Toe with only one shim. Available individually. Instruction sheets are included in each shim packet. Estimated installation time - .5 hr/side
— Grey Application: Acura: Integra, Audi: 100, 5000, Buick: Skyhawk, Skylark, Somerset, Cadillac: Cimarron, Chevrolet Beretta, Cavalier, Citation, Corsica, Chrysler: Town & Country, Dodge: Caravan, Ram Van, Ford: Windstar, Mercury: Villager, Nissan: Quest, Oldsmobile: Achieva, Calais, Firenza, Omega, Plymouth: Voyager, Pontiac: Grand Am, Phoenix , J2000, Sunbird, Sunfire. 413.0185 Caution: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Also, some vehicles may require the use of longer bolts.
Copyright © 2025 Winzer 800-527-4126
8-6-20
Made with FlippingBook - Online magazine maker