Modular Wiring Systems for Lighting Flex 2 Basic Components
Click brand for more product info
Lighting Distribution Cable
ACS/Uni-Fab
Features: ꞏ Rated for use on 20 ampere branch circuits ꞏ Manufactured from Type MC Cable featuring 90°C insulated, #12 AWG solid copper conductors and a #12 AWG solid copper ground ꞏ Lighting cable leads are 105°C insulated, #18 AWG solid copper conductors ꞏ 6 inches of THHN insulated conductors are provided through a ½" connector for connection to the hard-wire system ꞏ Pin and sleeve connector design ꞏ To eliminate inter-voltage connection each connector is keyed and color coded to meet specific voltage requirements ꞏ UL listed and labeled Application: The Lighting Distribution Cable is the first component of the Flex2 modular wiring system. Once power is brought from the lighting panel to the point of distribution by conventional hard-wiring means, the Lighting Distribution Cable is installed through a ½" trade size knock-out. The cable conductors are spliced to the hard-wired conductors and the interface is complete. The opposite end of the component is connected to the first lighting fixture of a run.
Part Number
Description
Colors
120/208V
Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground
1DA*-R
Black, White and Green
1DB*-R
Black, Red, White and Green
Black, Red, Blue, White and Green
1DC*-R
277/480V 2DA*-R
Brown, Gray and Green
Brown, Orange, Gray and Green
2DB*-R
Brown, Orange, Yellow, Gray and Green
2DC*-R
* Denotes Cable Length In Feet Note: Add (-SC) suffix for 10 AWG conductors
Made with FlippingBook - professional solution for displaying marketing and sales documents online