Modular Wiring Systems for Lighting Flex 4 Accessory Components
Click brand for more product info
Whip End Lighting Cable
ACS/Uni-Fab
Features: ꞏ Rated for use on 20 ampere branch circuits ꞏ Manufactured from Type MC Cable featuring 90°C insulated, #12 AWG solid copper conductors and a #12 AWG insulated, solid copper ground ꞏ Lighting cable leads are 105°C insulated, #18 AWG solid copper conductors ꞏ Pin and sleeve connector design ꞏ To eliminate inter-voltage connection each connector is keyed and color coded to meet specific voltage requirements ꞏ UL listed and labeled Application: In operation, the Whip End Lighting Cable is used to deliver locally or panel-controlled branch circuit power to a lighting fixture in an accessible ceiling without the use of a factory- installed receptacle. This can be accomplished by joining the lighting fixture leads to the lighting cable leads via the push-in feature connectors supplied, then plugging the cable into a " knock-out in the fixture access plate. The “Whip-End” of the cable serves to extend the same branch circuit power to a non-accessible ceiling area.
Part Number
Description
Colors
120/208V
Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground
1LA*-W
Black, White and Green
1LB*-W
Black, Red, White and Green
Black, Red, Blue, White and Green
1L C *-W
277/480V 2L A*- W
Brown, Gray and Green
Brown, Orange, Gray and Green
2L B*-W
Brown, Orange, Yellow, Gray and Green
2 LC *-W
* Denotes Cable Length In Feet Note: Add (-SC) suffix for 10 AWG conductors
Made with FlippingBook - professional solution for displaying marketing and sales documents online