Modular Wiring Systems for Lighting Flex 3+ Basic Components
Click brand for more product info
Whip End Extender Cord
ACS/Uni-Fab
Features: ꞏ Rated for use on 20 ampere branch circuits ꞏ Fixture Cord Drop manufactured from S.E.O. Cord ꞏ Tap conductors are 105°C insulated, #16 AWG stranded copper conductors with a #16 AWG stranded copper ground ꞏ Pin and sleeve connector design ꞏ Can be field wired or factory installed and shipped with fixtures ꞏ UL listed and labeled Application: The Whip End Extender Cord is used in conjunction with the Double-End Extender Cable and the Double Headed Distribution Cable. This component, when used with the Double-End Extender Cable enables the removal of a particular fixture without interrupting power flow down the line.
Part Number
Description
Colors
120/208V
Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground Single Circuit, B phase, 2-Wire W/Ground Single Circuit, C phase, 2-Wire W/Ground Single Circuit, 2-Wire W/Ground Two Circuit, 3-Wire W/Ground Three Circuit, 4-Wire W/Ground Single Circuit, B phase, 2-Wire W/Ground Single Circuit, C phase, 2-Wire W/Ground
1CEA*-W
Black, White and Green
1CEB*-W
Black, Red, White and Green
Black, Red, Orange, White and Green
1CEC*-W
1CED*-W
Black, White and Green
1CEF*-W
Black, White and Green
277/480V
2CEA*-W
Black, White and Green
2CEB*-W
Black, Red, White and Green
Black, Red, Orange, White and Green
2CEC*-W
2CED*-W
Black, White and Green
2CEF*-W
Black, White and Green
* Denotes Cable Length In Feet Note: Add (-SC) suffix for 10 AWG conductors
Made with FlippingBook - professional solution for displaying marketing and sales documents online