Modular Wiring Systems for Lighting Luminary Flex 4C Accessory Components
Click brand for more product info
Whip End Lighting Cable
ACS/Uni-Fab
Features: ꞏ Rated for use on 20 ampere branch circuits ꞏ Manufactured from Type MC_PCS Cable featuring 90°C insulated, #12 AWG solid copper conductors and a #12 AWG insulated, solid copper ground and two 0-10V, 16 AWG twisted jacketed pair controls ꞏ Lighting cable leads are 105°C insulated, #18 AWG solid copper conductors ꞏ Pin and sleeve connector design ꞏ To eliminate inter-voltage connection each connector is keyed and color coded to meet specific voltage requirements ꞏ UL listed and labeled Application: In operation, the Whip End Lighting Cable is used to deliver locally or panel-controlled branch circuit power and controls to a lighting fixture in an accessible ceiling without the use of a factory-installed fixture receptacle. This can be accomplished by joining the lighting fixture leads to the lighting cable leads via the push-in fixture connectors supplied, then plugging the cable into a ½" knock-out in the fixture access plate. The “Whip-End” of the cable serves to extend the same branch circuit power and 0-10V controls to a non-accessible ceiling area.
Part Number
Description
Colors
120/208V
Single Circuit/ Two 0-10V Controls, 2-wire w/16AWG Twisted Pair & Ground Single Circuit/ Two 0-10V Controls, 2-wire w/16AWG Twisted Pair & Ground
Phase: Black, White, Green Controls: Purple, Pink
C1LC*-W-TP
277/480V
Phase: Brown, Gray, Green Controls: Purple, Pink
C2LC*-W-TP
* Denotes Cable Length In Feet Note: Add (-SC) suffix for 10 AWG conductors
Made with FlippingBook - professional solution for displaying marketing and sales documents online