TROF Tray Hanger & Supports
Click brand for more product info
Cope US Tray
Vertical Support
ꞏ Tray Supports can be bolted anywhere along the straight runs ꞏ They can be bolted directly onto the coupler plates at splices of straight runs and riser fittings, or they can be bolted at any place in the run by field-drilling side rails ꞏ TROF supports are used with either 3⁄8" or 1⁄2" hanger rods ꞏ Finish is eIectrogalvanized
Catalog #
For Use With
3 1⁄4" Overall Height Side Members 4 1⁄4" Overall Height Side Members 5 1⁄4 "Overall Height Side Members 6 1⁄4" & 7 1⁄4" Overall Height Side Members
9045
9043-37
9043
9025-98
Single Rod Hanger Support
ꞏ Other channel types and finishes available upon request; contact factory ꞏ To order hardware only: ꞏ 3⁄8 " - PGV38000O ꞏ 1 " - PGV12000O Example: P20020GV12036B is a Single 20" pre- galvanized channel with 1 " x 36" drop rod and P2622 clamp Note: Order channel length 8" longer than tray width For example, 44" channel for 36" tray
Catalog # Assy. Type
Channel Length*
Channel Finish**
Rod Diameter
Rod Length
Beam Clamp
(in) (mm)
(in)
(mm)
(in)
(mm)
38= 3⁄8 9.53 000 - No Rod A - Bridgeport
P200 14 356
12= 1⁄2 12.7 036 - 36 914
1 432 20 508
B - P2622
GV Pre-Galv) HG Hot Dipped Galv)
072 - 72 1828 120 - 120 3048
O - No Clamp R - Rod Coupler
26
661
32 813 38 966 44 1118
144 - 144 3658 S - Special
Made with FlippingBook - professional solution for displaying marketing and sales documents online