Standard (Part Numbers: S12)
Used for tray-to-tray or tray-to-fitting connections.
1 ⁄ 16 " Tray Clearance
Mid Span (Part Numbers: S12-MID)
Fiberglass Cable Tray & Channel 13 ⁄ 32 " Hole (8 places) 13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places)
5"
Click brand for more product info
6"
Straight Splice Plates Used for tray to tray or tray to fitting connections. Splice Plates
12"
Cope US Tray
Low Profile (Part Numbers: LS12)
26 3 ⁄ 32 "
12" Expansion Splice Plates Used to accommodate thermal expansion/ contraction of extended straight tray runs. The following table should be used as a guideline 3 1 ⁄ 2 " 1 ⁄ 16 " Tray Clearance in determining the number of expansion splice plates needed for your application. 13 ⁄ 32 " Hole (8 places) 13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places)
Standard (Part Numbe
Used for tray-to-tray or tray-to-fitting connections.
Note: The S12-MID is for use with BE and CE Style Fiberglass Cable Tray
1 ⁄
Mid Span (Part Numbers: S12-MID)
Standard Part Number (S12)
Standard (Part Numbers: S12)
ing connections.
Note: Not sold in pairs Requires 8 nuts/bolts per plate
1 ⁄ 16 " Tray Clearance
S12-MID) ting connections.
Standard (Part Numbers: S12)
6"
12"
13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places) 13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places)
1 ⁄ 16 " Tray Clearance
Low Profile (Part Nu
S12-MID)
Low Profile (Part Numbers: LES12)
Standard (Part Numbers: ES12)
Standard (Part Numbers: S12)
Used for tray-to-tray or tray-to-fitting connections.
26 3 ⁄ 32 "
5"
12"
1 ⁄ 16 " Tray Clearance
Note: The S12-MID is for use with BE and CE Style Fiberglass Cable Tray
Mid Span (Part Numbers: S12-MID)
6"
5"
12"
13 ⁄ 32 " Hole (8 places)
13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places)
Low Profile (Part Numbers: LS12)
6"
5"
32 "
12" 12"
1 ⁄
Low Profile Part Number (LS12)
Low Profile (Part Numbers: LS12)
and CE Style Fiberglass Cable Tray
Note: Not sold in pairs Requires 6 nuts/bolts per plate
6"
12"
32 "
3 1 ⁄ 2 "
12"
Low Profile (Part Numbers: LS12)
and CE Style Fiberglass Cable Tray
Note: S12 is used as a standard and expansion splice plate
26 3 ⁄ 32 "
12"
1 ⁄ 16 " Tray Clearance 3 1 ⁄ 2 "
Standard (Part Numbers: ES12)
Low Prof
Expansion Splice Plates Temperature Differential Deg. F
Note: The S12-MID is for use with BE and CE Style Fiberglass Cable Tray
Tray Length for 1 Expansion Standard (Part Numbers: S12)
Max Distance Between Expansion Splices 3 1 ⁄ 2 "
1 ⁄ 16 " Tray Clearance
Standard (Part Numbers: ES12) Mid Span (Part Numbers: S12-MID) Note: Cannot be used w/ Z shape Mid-Span Part Number (S12-MID) Used for tray-to-tray or tray-to-fitting connections.
(ft) 1 ⁄ 16 " Tray Clearance
(ft)
1 ⁄ 16 " Tray Clearance
417 Low Profile (Part Numbers: LH90, LH45, LH22.5)
667 Standard (Part Numbers: H90, H45, H22.5)
25° Low Profile (Part Numbers: LES12)
13 ⁄ 32 " Hole (8 places)
13 ⁄ 32 " x 21 ⁄ 32 " Long Slot (8 Places)
50°
333
208
Low Profile (Part Numbers: LES12)
Standard (Part Numbers: ES12)
5"
75°
222
139
Standard (Part Numbers: ES12)
Low Profile (Part Numbers: LES12)
100° 125° 150° 175°
167 133
104
6"
12"
83
Low Profile (Part Numbers: LS12)
111
69
26 3 ⁄ 32 "
95 59 The 1 inch slotted holes in each expansion connector allow 5⁄8" total expansion or contraction. 12"
Note: The S12-MID is for use with BE and CE Style Fiberglass Cable Tray
3 1 ⁄ 2 "
Standard (Part Numbers: H90, H45, H22.5) Standard (Part Numbers: H90, H45, H22.5) horizontal and vertical direction changes in the field. These splice plates may also be used to fabricate special fittings. Used for 90°, 45°, and 22.5° horizontal direction changes. Fixed Angle Horizontal Splice Plates Often field situations necessitate unplanned changes in the horizontal or vertical direction of a cable tray run. Fixed angle and adjustable splice plates provide a means to make
Low (Pa LH
Standard (Part Numbers: H90, H45, H22.5)
Standard Part Number (H90, H45, H22.5)
1 ⁄ 16 " Tray Clearance
Note: Holes must be drilled in field. Hardware
purchased separately
Low Profile (Part Numbers: LH90, LH45, LH22.5) Low Profile (Part Numbers: LH90, LH45, LH22.5)
Low Profile (Part Numbers: LES12)
Standard (Part Numbers: ES12)
Low Profile (Part Numbers: LH90, LH45, LH22.5)
Standard (Part Numbers: H90, H45, H22.5)
Low Profile Part Number (LH90, LH45, LH22.5)
Note: Holes must be drilled in field. Hardware
purchased separately
Made with FlippingBook - professional solution for displaying marketing and sales documents online