5 7 ⁄ 8 " (TYP)
Fiberglass Cable Tray & Channel Tray Covers & Accessories
Click brand for more product info
5 " (TYP)
5 7 ⁄ 8 " (
Cope US Tray
Hold Down Package Part Number (HDBLTNT) The Hold Down Package consists of the necessary components for securing fiberglass cable tray to strut or wall brackets. The Hold Down Package includes one each of the following items: HD4AB (hold down clamp), 500PU-200 ( 1⁄16" -13 x 2" fiberglass bolt) and 500PU-CN (1 1" strut nut). The components are also available individually. Installation procedures are located in the Installation Procedures Section of this catalog.
5 " (TYP)
Barrier Strip Part Number (RGBS4V) Barrier strip is supplied in ten foot lengths and is intended for field installation unless otherwise indicated. For securing barrier strip to tray, we recommend the use of Nylon Drive Rivets (Part #NDR1) which require field drilling or Adjustable Divider Clamps (Part #ADC1). Barrier strip is available in polyester and vinyl ester resin types. To specify vinyl ester, add suffix "V" to part number. Combination Hold-Down Clamp and Expansion Guide Part Number (HD4AB) Hold-Down side secures and prevents lateral movement of cable tray while expansion side allows for thermal expansion and contraction of cable tray. Hold Down Kit Hold Down Expansion Guide Kit
Hold Down Kit
Hold Down Expansion Guide Kit
Adjustable
Barrier Strip
Adjustable Divider Clamp
Tray Style
Part Number
Dimensions
[RGBS] [LD] [T] [FT] [R] [V]*
3" x 2" x 3⁄16" 4" x 2" x 3⁄16" 6" x 2" x 3⁄16"
Low Profile Standard
LC
BE, CE, FE
V=VINYL ESTER RESIN
LD=LOAD DEPTH (3”,4”,5”,6”) T=TYPE OF BEND: H=HORIZONTAL, V=VERTICAL
Deep
CZD
FT=FITTING TYPE: 30F/I/O, 45F/I/O, 60F/I/O, 90F/I/O R=BEND RADIUS (12”, 24”, 36”)
*Use RGBS4 with FE tray
Floor & Panel Flange Part Number (LF400, F400) Available in polyester and vinyl ester resin. To specify vinyl ester, add suffix "V" to part number.
Adjustable Divider Clamp The Adjustable Divider Clamp makes locating the barrier strip a snap. The ADC is available in polyester and vinyl ester resin. To specify vinyl ester, add suffix "V" to part number. Two clamps per ten foot section of barrier strip are recommended.
5 7 ⁄ 8 " (TYP)
Tray Style
Part Number
5 " (TYP)
Low Profile Standard
LADC1
ADC1 ADC1
Deep
Made with FlippingBook - professional solution for displaying marketing and sales documents online