Fiberglass Cable Tray & Channel Fiberglass Channel
Click brand for more product info
Cope US Tray
Fiberglass Channel
Fiberglass channel is designed to carry light wiring or tubing loads where a transition from cable tray to individual control points is required. All straight sections are offered in solid or punched construction and are supplied in ten and twenty foot lengths. Fiberglass Channel is available in polyester or vinyl ester resin. Contact factory for vinyl ester channel pricing. Channel fittings are supplied completely assembled from the factory. Special channel fittings that are not standard catalog items are available upon request. Channel splice plates and fasteners are separate order items.
B
A
Width
Solid and Punched Straight Channel 10ft. & 20ft. Length)
Covers
Solid
Punched*
Width
"A"
"B"
(in)
(mm)
(in)
(mm)
(in)
(mm)
51 1 13⁄16
1⁄8 1⁄4
31 22 35 41 56
3 6 5 6 6
C2-SL10 C3-SL10 C4-SL10 C6-SL10 C8-SL10
CH2-(L) CH3-(L) CH4-(L) CH6-(L) CH8-(L)
-Not Avail- CH3-(L)P CH4-(L)P CH6-(L)P CH8-(L)P
2 3 4
7⁄8
76
102 1 3⁄8
3⁄16 1⁄4 1⁄4
6 152 1 5⁄8 8 203 2 3⁄16
*Punched channel consists of two rows of 1⁄2" diameter holes on 12" centers.
Channel Fittings [CH] Solid and punched Channel Fittings are available for all channel widths except 2" (2" punched channel fittings are not available). All fittings are preassembled and do not include splice plates and hardware. Contact factory for dimensional information on 45° Channel Fitting bends. Unless specified otherwise, smooth radius channel fittings will be supplied wherever possible for all 4" (102mm) and 6" (152mm) widths. Ordering Information To create a part number, first insert the fitting type from key shown below. Then substitute the appropriate number for “W”, the desired
radius for “R” and the degree of bend for “D”. Add a “P” suffix to the “W” designation to specify punched channel fittings. Channel Fittings are available in polyester or vinyl ester resin. Polyester is standard; to specify vinyl ester resin, add the suffix "V" to the part number. [CH][W]-[HB][D]*-[R]*[V] Suffix Ordering Information:
Vinyl Ester
Radius (12", 24", 36")
Width (2", 3", 4", 6", 8")
Degree (45°, 90°)
Base Part: HB - Horizontal Elbow VI - Inside Vertical Elbow VO - Outside Vertical Elbow
Example: CH4-HB90-24 4" Wide Channel, 90° Horizontal Elbow, 24" Radius
HT - Horizontal Tee X - Horizontal Cross
* Radius and degree designations do not apply to tees and crosses. Note: Connector plates and hardware are not included and must be ordered separately.
Made with FlippingBook - professional solution for displaying marketing and sales documents online