HydroMAX Product Catalog

LIQUID

#HYDROC2.5 2.5 gal. #HYDROC30 30 gal.

#HYDROINJ2.5 2.5 gal. #HYDROINJ30 30 gal.

#HYDRO902.5 2.5 gal. #HYDRO9030 30 gal.

Hydro-Inject

Hydro-90

Hydro-Cure

ACTIVE INGREDIENTS 17% ....................................................... Alkoxylated Polyols 83% ................................... INERT INGREDIENTS 100% ......................................................... TOTAL

KEEP OUT OF REACH OF CHILDREN

ACTIVE INGREDIENT Alkoxylated Polyols .....................................................100%

CAUTION

ACTIVE INGREDIENTS Polyalkylene Glycol. ....................................................... 40% INERT INGREDIENTS Water .................................................................................. 60% TOTAL............................................................................ 100.0%

KEEP OUT OF REACH OF CHILDREN

CAUTION

NONPLANT FOOD INGREDIENT

Read entire label for additional precautionary statements and use directions.

Read entire label for additional precautionary statements and use directions. FOR PROFESSIONAL USE ONLY

F352

Read entire label for additional precautionary statements and use directions. FOR PROFESSIONAL USE ONLY

NONPLANT FOOD INGREDIENT

FOR PROFESSIONAL USE ONLY

NONPLANT FOOD INGREDIENT

F352

FIRST AID If on Skin: Wash with soap and water. Consult a physician if any irritation persists If in Eyes: Rinse with clean water for 15 minutes. Remove contact lenses after the first 5 minutes and continue to rinse. Seek medical attention if irritation persists. If Ingested: Call 911 or a physician for treatment advice.

FIRST AID If on Skin: Wash with soap and water. Consult a physician if any irritation persists If in Eyes: Rinse with clean water for 15 minute. Remove contact lenses after the first 5 minutes and continue to rinse. Seek medical irritation if irritation persists. If Ingested: Call 911 or a physician for treatment advice. Have the product label with you when calling a doctor or going for treatment.

PRECAUTIONS •

Avoid getting in eyes or on skin. The use of safety glasses with side shields (or goggles) and water repellent, chemical resistant gloves when handling this product is recommended. Do not contaminate food, feed, seed or water supplies during application or when cleaning equipment.

PRECAUTIONS •

•

IN CASE OF SPILL OR MEDICAL EMERGENCY, CONTACT CHEMTREC 1-800-424-9300.

•

Have the product label with you when calling a doctor or going for treatment.

IN CASE OF SPILL OR MEDICAL EMERGENCY, CONTACT CHEMTREC 1-800-424-9300.

KEEP OUT OF REACH OF CHILDREN

Have the product label with you when calling a doctor or going for treatment.

NET CONTENTS:

250 gallons (946 liters)

30 gallons (113.52 liters)

2.5 gallons (9.46 liters) Weight per gallon: 8.59 lbs. @ 68°F

250 gallons (946 liters)

30 gallons (113.56 liters)

2.5 gallons (9.46 liters) Weight per gallon: 9.58 lbs. @ 68°F

250 gallons (946 liters)

55 gallons (208.2 liters)

30 gallons (113.56 liters)

2.5 gallons (9.46 liters) Weight per gallon: 8.60 lbs. @ 68°F

Harrell’s, LLC Post Office Box 807 | Lakeland, FL 33802 | (800) 282-8007

Harrell’s, LLC Post Office Box 807 | Lakeland, FL 33802 | (800) 282-8007 | Harrells.com

11/19

Hydro-Inject.indd 1

10/13/2015 10:07:08 PM

Hydro-90 HYDRO902.5.indd 1

9/4/2015 6:39:16 PM

Hydro-Cure®  Designed to enhance infiltration and promote uniform water distribution  Formulated for both injectable and ground spray equipment  Alleviates soil water repellency ACTIVE INGREDIENT Polyalkylene Glycol ...................................................... 40.0% INERT INGREDIENT Water ................................................................................... 60.0%

Hydro-Inject®  Designed to enhance infiltration and promote uniformwater distribution  Formulated for both injectable and ground spray equipment  Alleviates soil water repellency ACTIVE INGREDIENTS Alkoxylated Polyols ...................................................... 17.0% Inert Ingredients ............................................................ 83.0%

Hydro-90®  Designed to improve infiltration and promote uniform water distribution  Formulated for longevity  Alleviates soil water repellency

ACTIVE INGREDIENT Alkoxylated Polyols ....................................................100.0%

NON-PLANT FOOD INGREDIENT

Product Information: Hydro-90® is a soil surfactant designed for use on turfgrass and ornamentals. Once in the root zone, Hydro-90® helps reduce soil water repellency, a cause of localized dry spot (LDS). When used as directed, Hydro-90® will help to improve the infiltration and overall movement of water in the root zone. Hydro-90® is readily soluble in water and can be applied with conventional application equipment. Apply Hydro-90® early in the season prior to the onset of stress. Do not apply Hydro-90® to turf and ornamentals under stress.

NON-PLANT FOOD INGREDIENT

Product Information: Hydro-Inject® is designed to enhance the infiltration and penetration of water applied through irrigation systems. Hydro-Inject® can be applied through all conventional irrigation systems or by conventional ground spray equipment. When used according to directions, Hydro-Inject® will not harm fine turfgrass or ornamentals. Rates: Greens, Tees, Fairways, Lawns and Sports Turf Injection Application: Inject 1 - 2 quarts or 5 - 10 ppm of Hydro-Inject per acre. Hydro-Inject can be applied through all injection systems. Apply monthly or as needed throughout the growing season. Ground Spray Equipment: Apply Hydro-Inject at 1 - 2 fl.oz. per 1,000 sq. ft. in 2 gallons of water. Best performance will be obtained if syringe cycle is activated following application. Irrigation is recommended after each application to remove Hydro-Inject from the leaf surfaces. Ornamentals Potting Media Treatment: Spray 8 - 16 fl oz per cu yd in at least 2 gallons of water per cu yd. Apply to media during blending. Production and Pre-shipment: Drench 24 - 32 fl oz per 100 gal water thoroughly wetting potting media. Plug Production: Drench before germination or after first leaf stage with 8 - 16 fl oz per 100 gal water thoroughly wetting potting media. Regular Irrigation Injection: Use 0.52 fl oz per 100 gallons of water (10 ppm) or 0.40 fl oz per gallon stock solution at 1:100 Injector Ratio.

Product Information: Hydro-Cure® is a soil surfactant treatment formulated to relieve existing water related problems such as localized dry spots. Hydro-Cure® is easy to use and will not harm turf and ornamentals when used in accordance with product directions. When used as directed, Hydro-Cure® can be applied at anytime of the year when water repellency and/or localized dry spots impact the appearance of turfgrass and ornamentals.

Rates: Greens, Tees, Fairways, Lawns and Sports Turf

Ground Spray Equipment: Apply 5 - 8 fl. oz. of Hydro- Cure® per 1,000 sq. ft. in 1 gallon of water on a weekly basis until turf conditions improve, then begin monthly treatment or apply as needed at 5 - 8 fl. oz. of Hydro- Cure® per 1,000 sq. ft. Irrigation is required after each application to remove Hydro-Cure® from the leaf surface. Injection Application: Inject 0.5-2 quarts or 2.5-10 ppm of Hydro-Cure® per acre. Hydro-Cure® can be applied through all injection systems. Apply monthly or as needed throughout the growing season. Ornamentals Potting Media Treatment: Spray 4 - 8 fl oz per cu yd in at least 2 gallons of water per cu yd. Apply to media during blending. Production and Pre-shipment: Drench 12 - 16 fl oz per 100 gal water thoroughly wetting potting media. Plug Production: Drench before germination or after first leaf stage with 4 - 8 fl oz per 100 gallons water thoroughly wetting potting media. Irrigation Injection: 0.26 fl oz per 100 gal of water (10 ppm) Regular irrigation: 0.20 fl oz per gallon stock solution at 1:100 Injector Ratio.

Long-Term Rate: Apply 8 fl.oz per 1,000 sq. ft. in sufficient water for thorough coverage. Follow up with second application of 8 fl.oz per 1,000 sq. ft. 7 - 10 days later. Irrigation is recommended after each application in sufficient amounts to remove Hydro-90® from leaf surfaces. Reapply after 3 months or as necessary. Short-Term Rate: 3 - 6 fl oz per 1,000 sq. ft. on a monthly basis or 2 - 3 fl oz biweekly. Irrigation is recommended after each application in sufficient amounts to remove Hydro-90® from leaf surfaces. Apply in sufficient water for thorough coverage. Ornamentals Potting Media Treatment: Spray 2 - 4 fl oz per cu yd in at least 2 gallons of water per cu yd. Apply to media during blending. Production and Pre-shipment: Drench 6 - 8 fl oz/100 gal water thoroughly wetting potting media. Plug Production: Drench before germination or after first leaf stage with 2 - 4 fl oz per 100 gal water thoroughly wetting potting media. Regular Irrigation Injection: 0.13 fl oz/100 gal of water (10 ppm) or 0.10 fl oz per gallon stock solution at 1:100 Injector Ratio. Weekly Irrigation Injection: 1.3 fl oz/100 gal of water (100 ppm) or 1.3 fl oz per gallon stock solution at 1:100 Injector Ratio.

L G P

L G

Liquid Granular

Pellets

Harrell’s HydroMAX® Soil Surfactants | 5

Made with FlippingBook - Online Brochure Maker