MRN_909559_2024-25_Catalog

Air conditioning control elements Electronic controls

Part number

MyTouch Display

WBCL151002

n

Cabin Control Kit A-Series Includes: electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m, remote air temperature sensor 3 m, max. switching current: 2 x 3.15 A Ultimate Cabin Control Kit Includes: electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m, remote air temperature sensor 3 m, max. switching current: 3.15 A Will be the “Master” unit in a Master-Slave configuration Ultimate Cabin Control Includes: Electrical box with controller card, max. switching current: 3.15 A Shall be configured as “Slave” unit in a Master-Slave configuration Control Box F-Series F500-F2000 Kit includes: Electrical box with controller card, MyTouch display with Webasto cover plate, display cable 5 m

WBCL151000

n *

2510197

n *

2510198

n

2510288

n

Display cable MyTouch 5 m

WBCL151001

n n

n

Display cable MyTouch 10 m

WBCL151005

n n n n

Can also be used to create the “Master-Slave” network between Ultimate Cabin Control units Coupling for display cable MyTouch Can be used to extend MyTouch display cables

WBCL151006

n n n n

Remote air temperature sensor with 3 m cable

WBCL000813

n **

Remote air temperature sensor with 6 m cable

WBCL000810

n

n

n **

Remote air temperature sensor with 12 m cable

WBCL000812

n

n

n **

BlueCool CAN-Bus module

WBCL1203091

n n n

Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 4.5 to 6,000 BTU / h Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 9 to 12,000 BTU / h Electronic silencer: to be mounted afterwards for significant reduction of humming noise at low blower speeds suitable for 16 to 24,000 BTU / h

WBCL010160

n

WBCL010161

n

WBCL010162

n

Already included in scope of delivery n Optional accessory * A-Series air handler may also be connected to chiller control directly. In this case no cabin control kit is needed. ** Required if chiller shall run in automatic mode or if air handlers are connected to the chiller electronics. n Mandatory accessory

178

Made with FlippingBook Online newsletter