Coolant heaters Thermo Pro 50 Eco
Thermo Pro 50 Eco coolant heater This compact 5 kW unit is ideal for the majority of marine applications. Compact design, variable temperature control, service friendly technology and low noise levels.
What is the new generation about? Stepless heating power adjustment between 1.8 and 5 kW Less start-stops Mainswitch with blinking code (analog control) Excellent possibilities for combining with Webasto BlueCool air conditioning systems Separate temperature control in every cabin Low fuel consumption Preheating of the engine possible to avoid cold starts Robust aluminum casing, resistant to high temperature or salt The advantages of coolant heaters: Even distribution of warmth by means of radiators Hot water for the shower and galley Space-saving installation
The Thermo Pro 50 Eco is placed in the locker compartment of the boat. Radiators are used to heat up the boat, because electrical autonomy in this size of boat is often very important and radiators do not consume electricity of the battery.
The Thermo Pro 50 Eco in the engine compartment is able to heat the entire b oat. Each cabin has individually sized convectors to match the heating requirements.
Technical specifications
Thermo Pro 50 Eco
Heating power (kW) Heating power (BTU / h) Fuel consumption (l / h) Fuel consumption (gal / h)
5.0 17,100
0.3 – 0.6 0.08 – 0.16
Fuels*
Diesel DIN EN 590
Rated voltage (V)
24
Rated power consumption (W) Rated power consumption (amps)
28 – 46 1.2 – 1.9
Flow rate of coolant pump (against 0.14 bar) (l / h) Flow rate of coolant pump (against 0.14 bar) (gal / min.) Flow rate of coolant pump (against 0.10 bar) (l / h) Flow rate of coolant pump (against 0.10 bar) (gal / min.)
500 2.2 900 4
Dimensions L x W x H (mm) Dimensions L x W x H (inch)
218 x 91 x 144 8.6 x 3.6 x 5.7
Weight (kg) Weight (lbs)
2.5 5.3
* Information about further fuels on request.
30
Made with FlippingBook Online newsletter