Use a brace to temporarily secure the truss to a wall panel if necessary.
Raise the second truss and repeat the process for each subsequent truss.
For long, two-part trusses, installed over a load bearing wall, use the Tie Plate to attach two parts of the truss to each other. This is similar to the process you used to join two wall panels together with a Tie Plate. Continue truss assembly according to the manual until all trusses are in place. When all the trusses are set, install the L metal at each end of the trusses and attach it to the parapet wall. Use Tie Plates to attach each of the trusses to each wall panel.
Page 63|71
Made with FlippingBook Online newsletter maker