Tesis Thesis
INTERIOR CONJUNTO-LO PRIVADO INTERIOR OF THE COMPLEX – PRIVATE AREA
MÓDULO 1020 1020 MODULE
Evaluación e implementación de un sistema estructural prefabricado en CLT para densificación y ampliación de bloques CORVI levantados en Concepción a fines de los años 60. Evaluation and implementation of a prefabricated structural system in CLT for the densification and expansion of the CORVI blocks erected in Concepción at the end of the 1960s.
EXTERIOR CONJUNTO-EL PASEO + EQUIPAMIENTO EXTERIOR OF THE COMPLEX - THE PROMENADE + FACILITIES
CONECTIVIDAD + ESTACIONAMIENTOS CONNECTIVITY + PARKING
Autor Author JOSEFINA DOMÍNGUEZ (*) Profesores guía Thesis advisors JUAN IGNACIO BAIXAS, FRANCISCO CHATEAU Tesis para optar al grado de Magíster de Arquitectura Sustentable y Energía y al título de arquitecto de la Pontificia Universidad Católica de Chile, septiembre 2017. Thesis to qualify for the Master of Sustainable Architecture and Energy and the bachelor degree in architecture, Pontificia Universidad Católica de Chile, September 2017.
La presente investigación busca dar solución a la problemática de habitabilidad que presentan los bloques de viviendas CORVI conocidos como 1020, así como también a la baja densidad que actualmente registran con respecto a los terrenos donde fueron emplazados. Todo esto a través de un estudio de la arquitectura del bloque y sus posibilidades de ampliación y densificación en el territorio. Los bloques 1020 se encuentran distribuidos a largo de Chile -superan las dos mil unidades- y se emplazan, con leves variaciones, en lugares de condiciones climáticas completamente distintas. Tras 40 años de uso se hace necesario estudiar una adaptación que permita dar respuestas más apropiadas al lugar en donde están localizados. El conjunto del estudio se ubica en Concepción, y se propondrá un proyecto a escala urbana, de bloque y de construcción prefabricada, con lo que se aspira a mejorar sus estándares de habitabilidad sin dejar de lado la sustentabilidad que implican las modificaciones. Para llevar a cabo de manera eficiente estas trasformaciones se opta por un sistema prefabricado en madera en CLT (Cross Laminated Timber o Madera Laminada Cruzada), el cual permite disminuir costos, tiempo en obra, demandas por acondicionamiento y las cargas estructurales al edificio existente.
This investigation seeks to solve the problem of habitability presented by the CORVI residential blocks known as 1020, as well as the low density that they currently register with respect to the land where they were placed in. All this through a study of the architecture of the block and its possibilities of expansion and densification in the plot. 1020 blocks are distributed throughout Chile -over two thousand units- and are located, with slight variations, in places of completely different climate conditions. After 40 years of use it is necessary to study an adaptation that allows more appropriate responses to the place where they are situated. The compound of the study is in Concepción, and will propose a project at the urban scale, the building block itself and the prefabricated construction scale, which aims to improve its habitability standards without neglecting the sustainability involved in the modifications. To efficiently carry out these transformations, CLT (Cross Laminated Timber), a prefabricated wooden system, is chosen, which allows to reduce costs, time on site, demands for refurbishment and structural loads to the existing building.
100
Made with FlippingBook - Online magazine maker