HIGH-SPEED
Confirmed expertise with a wide range of high-speed solutions We are leading the way when it comes to providing our customers with cutting-edge high speed solutions. We demonstrate our expertise in every high-speed development including modeling, simulation and testing solutions. Our capabilities include differential impedance measurement, propagation delay simulation, insertion & return loss modeling, near-end crosstalk (next) & far-end crosstalk (fext) characterization and eye diagram realization. Amphenol has the right high-speed connector for every application and signals to be transmitted (RF, ethernet, optics, single-ended, diffy pairs,..).
Check out some of our products designed for high-speed applications.
DISPLAY AND VIDEO
BOARD TO BOARD
USB
MDP FTV Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device. Shell size 13 Uses standard Mini Display Port cordsets No cabling operation in field and no tools required Data Transmission: - Display 1.4 protocol - Transmission bandwidth : 32.4 Gbit/s with 8.1 Gbit/s per lane - Can support 8K UHD (7680 × 4320) at 60 Hz or 4K UHD (3840 × 2160) at 120 Hz
USB FTV Available in USB2.0 and USB3.0
TV μcom USB3.0 Based on MIL-DTL-38999 series III – Shell size 11 Aluminium shells Solder contact: max AWG24 Crimp contact: AWG 24 to 28 Temperature range : - 55°C / + 125°C IP68 sealing mated and unmated for PCB receptacles 1500 Vrms Dielectric Withstanding Voltage
HDAS High performance & competitive board to board connector 12 sizes from 11 to 253 contacts, including hybrid versions Current rating 4.5A per signal contact, 20A for power contacts Improved electrical security : up to 1.2mm Reach MIL-DTL-55302 performances
R-VPX Fully intermountable & intermateable to existing VITA 46 connectors Qualified to VITA 46 for Open VPX applications, up to 25 Gbps Lowmating force connector system Modular COTS lightweight connector system Can be combined with high power modules, RF Modules (VITA 67) and Optical modules (VITA 66)
Sealed against fluids and dusts (IP68) Shock, vibration and traction resistant No cabling operation in field and no tools required Improved EMI protection based on MIL- DTL-38999 Series III
Rugged USB Keys Based on MIL-DTL-38999 series III USB3.0 for capacities16, 32, 64, 128&256GB IP68, -40/+85°C MIL-STD-810G vibrations MLC Memory with Wear leveling providing 3000 read/write cycles MTBF: 1,000,000 hours Higher capacities: please consult us
Viper ® High density, modular, high vibration, ESD shielded connectors Meet VITA4 46 or 48 specifications in 3U and 6U configurations Signal integrity to 10 Gbps
75Ohms Coaxial Contacts Ideal for video acquisition Meet the 3G-SDI Crimp and PC Tails Size 6, 8 and 12 For 38999 series I,II,III (MIL-DTL-38999) & SIM/EN4165/2M connectors
ETHERNET
μCom-10Gb+ 10Gb+: exceeds 10Gb/s ethernet following IEEE 802.3an-2006: 10GBase-T Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standard 15mmmax external diameter Cat6A connector Environmental testing based on MILDTL- 38999 Series III military spec (Thread version) Environmental testing based on MILDTL- 26482 military specifications (Push Pull version)
Ethernet Switch RES-SCE-8MG Compact Ethernet switch a weight (390 grams) 8 gigabit managed ports Qualified per MIL-STD-461E military standard Perfect fit for most electronics embedded on the deck of the ship
Cat.7Cordsets&Cable High reliability Cat 7 Ethernet cable and cordsets Available in define cordset lenght or in complete drum for cabling operation VG 95218 approved. Halogen free, UV resitante, fungus resitance...
TV μcom Based on MIL-DTL-38999 series III – Shell size 11 10Gb+: exceeds 10Gb/s Ethernet following IEEE 802.3an-2006 : 10GBase-T Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standard Aluminum, stainless steel and marine bronze shell
RJFTVReducedFlange Smaller: 41% footprint surface reduction Lighter: 15% lighter than standard RJF TV receptacles MIL-DTL-38999 coupling mechanism Mates with standard RJF TV plugs & caps 3 platings: Olive Drab Cadmium, Nickel, Black Zn Ni Cat.6 Ethernet : 1Gb up to 250 MHz
Quadrax&Split-Pair Quadrax For use in MIL-DTL-38999 or EN4165 connectors Quadrax suitable for 1GBASE-T and Split Pair Quadrax suitable for 10GBASE-T Frequency range up to 3 GhZ Are 100Ω, 110 Ω and 150Ω matched impedance Crimp and PC Tails available
RJ Field Series Cat5e, Cat6, Cat6a Rugged Ethernet Connectors for harsh environments Sealed against fluids and dusts (IP68) Shock, vibration and traction resistant No cabling operation in field and no tools required Mechanical coding/polarization (4positions)
RJ Switch
Octomax1G26 Ideal for the ethernet 1GBASE-T or AFDX network with a reduce envelop Fits within standard size 8 keyed cavity of D38999, EN3645 and EN4165
Rugged ethernet switch From 2 to 28 different ports of various types (Fast, Gigabit, Fiber) Managed and unmanaged versions Fully MIL-STD compliant MIL-S-901 tested for AEGIS application
5
Made with FlippingBook - Online Brochure Maker