information
Starver® X
General Instructions 1. If algae are present, it is recommended you treat this algae first with one of the Lo-Chlor Algaecides prior to beginning phosphate removal. 2. Clean or backwash filter and ensure pool water is balanced. 3. Shake the container well before use. 4. Slowly add the required amount of Starver® X to the pool water directly in front of the skimmer box inlet. 5. It is recommended that immediately following the addition of Starver® X, place one Lo-Chlor Miraclear Pool Clarifier Cube directly into the pump basket (follow package directions). The addition of a Miraclear Pool Clarifier Cube will reduce any cloudiness associated with phosphate removal. 6. Run filtration system continuously for 24 hours. Check filter pressure regularly and backwash, if necessary. 7. Test phosphate level of pool water at least 24 hours after treatment. 8. If necessary, repeat additional dosage of Starver® X at weekly intervals until phosphate level is within acceptable range. For faster results, Starver® X dosage can be repeated at 24-hour intervals.
Dose Rates
Starver® X is a safe and effective superior strength phosphate remover for swimming pools. One litre of Starver® X will remove up to 6000 ppb (6ppm) of phosphates from a 50,000 litre swimming pool. Starver® X is a curative solution designed to remove high phosphate levels.T
POOL VOLUME:
DOSE:
LOWER BY 1ppm: 84ml
GALLONS:
LITRES:
LOWER BY UP TO 6ppm: 500ml
5,500 11,000 16,500sslTpsREEERNOOATENOAAE
25,000 50,000 75,000
168ml 252ml
1000ml 1500ml
ProfeSSionaL tiPS: After treatment using Starver® X regularly check phosphate levels in your pool. For ongoing control and treatment of phosphates use Lo-Chlor Starver®
Made with FlippingBook Digital Publishing Software